£ GBPChange Country- Sign in
- Submit RFQ
Allpax gasket cutters & kits are designed to fabricate precise flange gaskets and circular joints. They efficiently & quickly cut materials like brass, steel, chrome, leather, cork, Teflon, rubber, plastic, PTFE and vulcanised fibre in maintenance & repair applications.
A
A
A
B
A
A
A
B
C
D
E
A
B
A
A
| Model | Item | Price (inc. GST) | |
|---|---|---|---|
| AX7001 | AG8YBK | SGD 9680.45 |
Allpax 4000 Series Gasket Cutters :
Allpax Gasket Cutters with Cutting Boards :
Allpax M3 Rotary Gasket Cutters :
The first deciding factor is if you need the assembly to be stationary or portable. In general, the extension style gasket cutters are portable and lightweight and are widely used to fabricate non-metallic or non-rigid gasket materials. Whereas the rotary style gasket cutters are heavier and require mounting or bolting on a vise or a workbench for fixed-location gasket cutting. These units are best for metallic or rigid gasket materials, as well as cutting out irregular-shaped gaskets. Although most gasket cutters operate manually, the rotary style gasket cutters are also available in a motorised variant for quick, hassle-free operation.
Rotary-style gasket cutters are used in applications having permanent installation constraints, whereas extension-style gasket cutters can be moved easily from one location to another for cutting gaskets of large diameters. Extension-style cutters require the gasket material to be laid flat on a workbench or a dedicated gasket fabrication table.
These Allpax rotary gasket cutters have a revolving disc and an electric motor connected to it that moves and cuts the gasket material automatically. To use, drill a tiny hole in the centre of the gasket material to be cut after setting the scale bar to the required outer diameter (OD). Open the cutter, place the material onto the spindle of a scale bar, and tighten with the knurled nut. Lower the cutting disc and apply pressure with one hand while using the other to move the crank. Make another circular cut around the intended inner diameter (ID) after removing any extra material and adjusting the scale bar to the desired ID. Remove the completed flange gasket last.