Hydraulic Flow Dividers

Filter

Hydraulic flow dividers are designed to distribute the single pump flow equally or in pre-defined ratios between 2 or more actuators. Raptor Supplies offers a wide range of hydraulic flow dividers... Read More

MONARCH -

Hydraulic Flow Dividers

MONARCH AFT100-510/510-B-650A
StyleModelPrice (inc. GST)
AAFT100-510/510-B-650 SGD 507.58
AAFT100-250/250-B-650 SGD 493.25
HALDEX BARNES -

Hydraulic Flow Dividers

HALDEX BARNES 1020075A
StyleModelDisplacementFlow RateHeightLengthOperating PressureWidthPrice (inc. GST)
A10200750.129 cc/rev2.4-5 GPM3.26"7.55"3000 psi2.99" SGD 712.96
A10200760.258 cc/rev5-10 GPM3.26"7.55"2300 PSI2.99" SGD 679.97
A11000420.581 cc/rev10-20 GPM4"9.85"2750 PSI4.25" SGD 1269.95
CHIEF -

Hydraulic Flow Divider Rotary Gear

Hydraulic Flow Divider Rotary Gear
ModelItemPrice (inc. GST)
FM-4R4.2SAH4UVY SGD 1738.55
PARKER -

GRESEN Hydraulic Flow Divider, Cast Iron, 5.51 Inch Length, 1.87 Inch Width

GRESEN Hydraulic Flow Divider, Cast Iron, 5.51 Inch Length, 1.87 Inch Width
ModelItemPrice (inc. GST)
PDC-12-50CT7GLH SGD 375.52

Hydraulic Flow Dividers

Hydraulic flow dividers distribute the flow coming from a single pump, equally or in pre-defined ratios, amongst 2 or more actuators. Raptor Supplies offers a wide range of hydraulic flow dividers from Chief and Haldex. These rotary gear type flow dividers are used to synchronise 2 parallel motions hydraulically rather than mechanically. They feature permanently moulded cast iron construction capable of withstanding operating pressure up to 3000 PSI and an integral differential relief valve for reducing built-up pressure inside. The 11 tooth hardened steel gears can rotate at a maximum speed of 4500 RPM, delivering an outer liquid pressure of 4500 PSI. Choose from a wide range of hydraulic flow dividers, available in 2.4 to 5, 2.5 to 5, 5 to 10 and 10 to 20 GPM flow ratings.

Features

Haldex Barnes 1100042 Flow Dividers:

  • It features moulded cast iron construction for structural rigidity and easy cleaning.
  • This flow divider has an integral differential relief valve to limit the differential pressure between two unmixable fluids.
  • It comes with 11-tooth-hardened steel gears for ease of operation.
  • This flow divider offers flow rates ranging from 10 to 20 GPM.
  • Models such as, 1020075 and 1020076 flow dividers offer flow rates of 2.4 to 5 GPM and 5 to 10 GPM respectively.

Chief FM-4R4.2S Hydraulic Flow Divider:

  • This flow divider has aluminium construction to resist corrosion on exposed surfaces.
  • It features a flow divider valve to maintain equal flow to two or more actuators.
  • This flow divider offers flow rates ranging from 2.5 to 5 GPM.

Frequently Asked Questions

How are hydraulic flow dividers installed?

  • Determine the flow rate requirements for each outlet.
  • Choose the appropriate type of flow divider for your application.
  • Mount the flow divider securely in the hydraulic system, aligning the ports.
  • Connect the hydraulic lines using appropriate fittings and hoses.
  • Test the flow divider to ensure even flow distribution and make adjustments if necessary.
  • Regularly monitor and maintain the flow divider and hydraulic system for optimal performance.

How do I choose the correct hydraulic flow divider for my hydraulic system?

  • Determine required flow rates and choose a divider that can handle them.
  • Choose a divider with the correct number of outlets.
  • Ensure the divider can handle the hydraulic system's maximum operating pressure.
  • Choose a more accurate divider if precision is necessary.
  • Choose a durable and low-maintenance divider.
  • Confirm compatibility with other hydraulic components.

How to clean and maintain hydraulic flow dividers?

  • Regularly inspect for damage, leaks or corrosion.
  • Keep it clean by wiping it down.
  • Ensure clean hydraulic fluid and replace filters regularly.
  • Check and maintain lubrication.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More