Source Any Part Request Now

Multiple Purchase Options Request for Quote

NET30 Terms Apply for a Trade Account

Plate And Beam Lifting Clamps

Filter

To load finished products into containers or load vehicles onto trailers, plate and beam lifting clamps are required in the construction & production industries. Beam clamps are suitable for... Read More

CALDWELL -

Sheet Lifter

StyleModelCapacityHeadroomPrice (inc. GST)
A60-3-60-- SGD 27034.05
A60-3-72-- SGD 28780.58
A60-5-60-- SGD 29257.70
A60-5-72-- SGD 30498.65
A60-10-72-- SGD 34731.47
TRACTEL -

Plate Clamp

Tractel plate clamps are designed to lift and transport plates, steel frames, profiles and fabricated assemblies, with no additional requirement of special tools. These plate clamps feature a permanently attached chain sling, with a large oval suspension ring, for handling heavy and abrasive loads up to 6600 lb and an automatic locking design, with a stainless steel spring mechanism, for added security. Choose from a wide range of these impact and wear resistant plate clamps, available in fully flexible clamping capacities ranging from 3/4 to 3-1/2 inches on Raptor Supplies.

StyleModelJaw CapacityPrice (inc. GST)
AKS2 0-25- SGD 1482.82
BNK1 40-60- SGD 3801.66
BNK3 40-80- SGD 7430.42
BNK5 50-100- SGD 12963.29
AKS1 0-20- SGD 1335.07
BNK1 0-20- SGD 2199.59
BNK2 30-60- SGD 5333.70
BNK2 60-90- SGD 5804.27
APPROVED VENDOR -

Beam Clamp

StyleModelLengthMaterialMax. LoadPipe SizeRod SizeTypeWidthPrice (inc. GST)
A22FP81------- SGD 26.03
B22FP79------- SGD 26.56
C22FP82------- SGD 24.75
ALL MATERIAL HANDLING -

PCU Series Plate Lifting Clamp

StyleModelCapacityJaw OpeningPrice (inc. GST)
APCUA005-- SGD 426.78
APCUA010-- SGD 517.83
APCUA020-- SGD 713.20
APCUA030-- SGD 1052.73
APCUA050-- SGD 1354.33
ALL MATERIAL HANDLING -

PCH Series Plate Lifting Clamp

StyleModelCapacityJaw OpeningPrice (inc. GST)
APCH005-- SGD 163.13
APCH010-- SGD 199.17
APCH020-- SGD 265.55
APCH030-- SGD 432.47
APCH050-- SGD 546.28
DAYTON -

Beam Clamps, Vertical Lift

Dayton beam clamps provide a permanent or temporary mount to flat or tapered I-beams. These ASME standard beam clamps decrease I-beam stress by applying load inside the flange edge . These beam clamps come with a suspension bar and are available in 1, 2, 3 and 5 ton jaw capacity variants.

StyleModelJaw CapacityPrice (inc. GST)
A3KR12- SGD 317.19
B4ZW25- SGD 610.89
A3KR11- SGD 292.54
B3KR13- SGD 508.59
DAYTON -

Plate Clamp

Dayton plate clamps are ideal for lifting metal plates / sheets and fragile equipment in manufacturing industries, without leaving any mark on the surfaces. These clamps feature a safety mechanism which ensures no clamp slipping, even under drastic loading / unloading conditions and can be used in both horizontal and vertical configurations. They are capable of lifting loads ranging from 660 to 3300 lb but can lift only one object at a time. The heavy-duty jaws of these clamps are made of hardened steel to ensure resistance against abrasion. Choose from a wide range of these plate clamps available in jaw opening widths ranging from 1/4 to 4 inches on Raptor Supplies.

StyleModelJaw CapacityPrice (inc. GST)
A22NA99- SGD 2381.01
A22NC01- SGD 2518.24
B22NC02- SGD 3774.96
VESTIL -

BC Series Beam Clamps

Vestil beam clamps are suitable for distributing load away from flange edges, for reducing I-beam flange stress during overhead lifting operations. They have a mechanical adjustment system for quickly swapping the clamp from one gantry to another and an integrated, bottom mounted bar for hoist attachment. These steel beam clamps feature a painted finish for protection against fluids & abrasive environments. Choose from a broad range of these beam clamps, available in load capacities ranging from 1000 to 10000 lb on Raptor Supplies.

StyleModelFits Beam Flange WHeightJaw DepthLengthMax. Jaw OpeningMax. LoadWidthPrice (inc. GST)
ABC-1------- SGD 142.14
BBC-10------- SGD 435.51
CBC-2------- SGD 166.16
DBC-4------- SGD 188.14
EBC-6------- SGD 308.54
FBC-8------- SGD 376.30
TRACTEL -

Beam Clamp

StyleModelJaw CapacityPrice (inc. GST)
ALT 1B- SGD 317.46
ACC07019- SGD 352.37
ACC07029- SGD 482.61
ALT 10B- SGD 926.36
CALDWELL -

Beam Web Clamp

StyleModelJaw CapacityPrice (inc. GST)
ABWC-5- SGD 4055.55
ABWC-10- SGD 4812.81
ABWC-10W- SGD 5563.51
CALDWELL -

Beam Flange Clamp

StyleModelJaw CapacityPrice (inc. GST)
ABFC-1- SGD 844.26
ABFC-2- SGD 874.90
ABFC-3- SGD 1094.31
ABFC-5- SGD 1286.92
ABFC-10- SGD 1754.21
VESTIL -

Non Marring Plate Clamp

Vestil plate clamps are suitable for lifting smooth / polished aluminium & stainless steel plates, marble slabs, wooden sheets and glass panels. They have non-marring, polyurethane coated jaws to prevent scratching and automatic clamping mechanism for minimising operation time. These plate clamps feature an oval suspension ring for securely hanging onto machinery. Choose from an extensive range of these non-marring plate clamps, available in 1100 & 3300 lb capacities on Raptor Supplies.

StyleModelCapacityHeightLengthPrice (inc. GST)
ANMPC-11--- SGD 4053.33
BNMPC-11-3--- SGD 5963.77
CNMPC-11-4--- SGD 6747.48
BNMPC-11-5--- SGD 7003.52
BNMPC-33--- SGD 6493.45
VESTIL -

Positive Locking Plate Clamp

StyleModelHeightLengthThroat DepthWidthWorking Load LimitPrice (inc. GST)
ALPC-20----- SGD 639.02
BLPC-40----- SGD 785.43
CLPC-60----- SGD 982.46
VESTIL -

Horizontal Plate Clamp

Vestil horizontal plate clamps are constructed of heavy-duty steel to lift plate material in a horizontal position. These clamps meet ASME B30.20 specifications to offer load limit ranging from 2000 to 10000 lb. They are ideal for use with materials with surface hardnesses up to 30 RC (300 HB). Choose from a wide range of these horizontal plate clamps, available in load capacities ranging from 2000 to 10000 lb on Raptor Supplies.

StyleModelHeightLengthWidthWorking Load LimitPrice (inc. GST)
AHPC-100---- SGD 962.97
BHPC-20---- SGD 354.30
CHPC-40---- SGD 413.56
DHPC-80---- SGD 544.65
VESTIL -

Vertical Plate Clamp

Vestil vertical plate clamps are integrated with teeth like jaws to lift sheet metal or steel plates and provide a strong grip. They feature a drop-forged steel case for optimum strength and automatic serrated hardened steel cams and pads for locking the plate in place. These vertical plate clamps meet ASME B30.20 standards and are compatible with materials having surface hardnesses up to 30 RC (300 HB). Variants are available in lengths ranging from 4.125 to 7.687 inches on Raptor Supplies.

StyleModelHeightLengthThroat DepthWidthWorking Load LimitPrice (inc. GST)
AEPC-20----- SGD 546.87
AEPC-80----- SGD 1131.47
AEPC-10----- SGD 338.95
AEPC-40----- SGD 754.90
VESTIL -

Vertical Plate Clamps With Chain

Vestil CPC Series plate clamps, with a chain, are ideal for lifting heavy plates or sheets in a vertical position; with a maximum load rating of 6600 lb. These units feature a lifting shackle, teeth within the jaws, a spring and pins / links to help grab the plate with utmost strength, thereby eliminating the need to drill or hitch. All units meet ASME B30.20 specifications and are available in lengths ranging from 4 to 9.750 inches on Raptor Supplies.

StyleModelHeightLengthMax. Jaw OpeningOverall ThicknessThroat DepthWidthWorking Load LimitPrice (inc. GST)
ACPC-10------- SGD 455.03
BCPC-20------- SGD 612.67
CCPC-40------- SGD 800.75
DCPC-80------- SGD 1236.49
RENFROE -

Beam Clamp

StyleModelJaw CapacityPrice (inc. GST)
ABC-01.50-A- SGD 845.91
ABC-03.00-A- SGD 1286.92
ABC-05.00-A- SGD 2197.38
RENFROE -

Plate Clamp

StyleModelJaw CapacityLocking TypeOperationPrice (inc. GST)
AFR-00.50-A--- SGD 902.27
BHR-00.50-A--- SGD 1685.25
CSCPA-01.50-A--- SGD 1978.52
CSCPA-00.50-A--- SGD 1678.69
DDWS-03.00-A--- SGD 4878.46
DDWS-01.50-A--- SGD 3908.90
DDWS-00.50-A--- SGD 2573.84
DDWS-00.25-A--- SGD 2291.51
BHR-01.50-A--- SGD 2132.83
BHR-00.75-A--- SGD 1713.71
BHR-00.25-A--- SGD 890.77
AFR-01.00-A--- SGD 1269.41
EJPA-02.00-A--- SGD 2451.27
EJPA-01.00-A--- SGD 2072.63
EJPA-00.50-A--- SGD 1356.96
FLJ-03.00-A--- SGD 2156.92
FLJ-02.00-A--- SGD 1772.80
FLJ-01.00-A--- SGD 1324.12
FLJ-00.50-A--- SGD 926.36
AFR-03.00-A--- SGD 2010.27
AFR-02.00-A--- SGD 1675.42
CSCPA-03.00-A--- SGD 2245.55
RENFROE -

Locking Turning Clamp 12000 lbs

ModelItemPrice (inc. GST)
TLA-06.00-AAH6XLL SGD 4145.29
TRACTEL -

Nonmarring Plate Clamp 1100 lb 3-15/16 inch

ModelItemPrice (inc. GST)
NXR05 20-100AG9THW SGD 3609.07
DAYTON -

Plate Clamp, Vertical Lift, 1000 lb Working Load, 0 To 5/8 Inch Jaw Capacity

ModelItemPrice (inc. GST)
LA-00.50-ACH6TFE SGD 1338.92
See Details

Plate And Beam Lifting Clamps

Plate and beam lifting clamps are used for moving, transferring, lifting and suspending heavy items. These lifting gears can be used for both vertical & horizontal lifting, without leaving marks on the attached material. Raptor Supplies offers a wide variety of beam and plate clamps, non-marring plate clamps, web and beam flange clamps, locking turning clamps and sheet lifters, from Vestil, Caldwell, Renfroe, Tractel and Dayton. These electro-galvanised, malleable iron / steel plate & beam clamps are available in load capacities ranging from 6000 to 20000 lb.
Vestil beam clamps minimise I-beam flange stress by distributing loads away from the flange edges during lifting. These solid steel plate lifting clamps are designed for exceptional strength and come with a bar located at the bottom to easily connect to a hoist. They can be interchanged from one gantry to another via their mechanical adjustment mechanism.
Renfroe plate clamps are vertical lifting clamps ideal for relatively light duty operations. They come with a Lock Closed feature which allows attaching the clamp to the plate, and a safety mechanism which ensures that the clamp does not slip when lifting force is applied. They are 300% overload factory tested for added protection and feature a compact design ideal for tight spaces.

Uses

These sheet metal lifting clamps and beam clamps offer a wide combination of features, making them useful for heavy duty applications in the mining, transportation, construction and steel industries.

Features

Caldwell Sheet Metal Lifting Clamps:

  • Caldwell sheet metal lifters have top lifting shackles and two load shackles having a maximum lifting capacity of 20000 lb.
  • Beam web clamps from Caldwell are designed for side load applications and have jaw capacities ranging from 6 to 15-3/4 inches.
  • The portable and lightweight beam flange clamps come with lock nuts to prevent inadvertent loosening of the units, and have built in suspension pins to ensure low headroom for easy handling of loads.

Vestil Plate Lifting Clamps:

  • Vestil beam clamps have a mechanical adjustment system for quickly swapping the clamp from one gantry to another, and an integrated, bottom mounted bar for hoist attachment. These steel beam clamps feature painted finish for protection against fluids & abrasive environments.
  • The vertical plate clamps are integrated with jaws to lift sheet metal or steel plates and provide a strong grip.
  • They feature a drop-forged steel case for optimum strength, and automatic serrated hardened steel cams & pads for locking the plate in place.
  • The brand's CPC Series plate clamps feature a lifting shackle, teeth within the jaws, a chain, a spring and pins / links to grab the plate with utmost strength, thereby eliminating the need to drill or hitch.
  • Non-marring marble lifting clamps have polyurethane coated jaws to prevent scratching and automatic clamping mechanism for minimising operation time. These plate clamps feature an oval suspension ring for securely hanging onto machinery.

Renfroe Beam and Plate Clamps:

  • These clamps are equipped with a safety mechanism for ensuring that the clamp does not slip when load is being lowered and lifting force is applied.

Dayton Plate and Beam Clamps:

  • Dayton plate clamps have a safety mechanism which ensures no clamp slipping, even under drastic loading / unloading conditions. They can be used in both horizontal and vertical configurations.
  • They are capable of lifting loads ranging from 660 to 3300 lb, but can lift only one object at a time.
  • These forged horizontal or vertical lifting clamps have heavy-duty jaws made of hardened steel to ensure resistance against abrasion.

Working Mechanism

These lifting clamps for plates or beams feature handgrips and lifting gears that enable them to manage, lift & turn heavy loads horizontally or vertically, in multiple directions, with ease and safety. They have jaw capacities up to 13.75 inches for a perfect grip.

Standards and Approvals

  • Caldwell lifting solutions are designed in compliance with ASME certifications and BTH standards for ensuring safety.
  • Renfroe clamps are 300% overload factory tested.
  • Vestil's lifting product catalogue features ASME certifications to guarantee safe and efficient use.

Frequently Asked Questions

Are there any payment options other than cards?

Raptor Supplies offers you to pay securely via PayPal as well.

What if I have any query regarding the product or its delivery?

You can easily get your queries resolved by contacting us through -
Email: sales@raptorsupplies.com
Call: +44 203 287 5224
WhatsApp: +44 7786 311597

How many plates can be lifted via a plate grab?

A plate lifting clamp should only be used to carry or lift a single plate at a time. However, the only exception to this plate lifting rule is that you need to distribute the weight, by lifting a stack of plates horizontally, using two or four clamps.

We are here to help!

Looking for a part not listed here?