Precision Metering Lubrication Pumps

Filter

Precision metering lubrication pumps are used in machines and equipment to supply a consistent level of lubrication for critical components like bearings, slides, gears, and chains to avoid equipment... Read More

TRICO -

Piston Oil Pumps

StyleModelTypeOutputReservoir CapacityReservoir MaterialDirection Of OutputPrice (inc. GST)
APE-6003-LPE-60150 cc/min.-PlasticLeft SGD 3544.45
RFQ
APE-6003-RPE-60150 cc/min.-PlasticRight SGD 3544.45
RFQ
BPE-6004-LPE-60150 cc/min.--Left SGD 3661.06
RFQ
BPE-6004-RPE-60150 cc/min.--Right SGD 3661.06
RFQ
CPE-6006-LPE-60150 cc/min.--Left SGD 4475.23
RFQ
CPE-6006-RPE-60150 cc/min.-MetalRight SGD 4475.23
RFQ
CPE-7006PE-70150 cc/min.--Left SGD 5191.74
RFQ
DPE-7008PE-70150 cc/min.-MetalLeft SGD 6024.70
RFQ
DPE-8008PE-80600 cc/min.-MetalLeft SGD 7128.49
RFQ
StyleModelPrice (inc. GST)
APMP200-01 SGD 1016.77
APMP200-02 SGD 1164.29
APMP200-04 SGD 1792.84
LUBE -

Air Precision Metering Pump Feed

StyleModelOverall WidthPrice (inc. GST)
APMP100-011.5" SGD 552.80
APMP100-022.5" SGD 1186.27
BPMP100-044.5" SGD 2309.72
LUBE -

Grease Lubrication System Feed

StyleModelMounting TypeOverall DepthOverall HeightOverall WidthPrice (inc. GST)
APMP530-04NEMA Box6.56"19.8"9" SGD 5202.02
BPMP350-06NEMA Panel7"14.75"12.88" SGD 5560.14
LUBE -

Oil Lubrication System

StyleModelMounting TypeOverall DepthOverall HeightOverall WidthPrice (inc. GST)
APMP540-04NEMA Box6.38"18"9" SGD 5001.48
BPMP360-08NEMA Panel4.75"12.75"10.88" SGD 6216.06

Frequently Asked Questions

How to prime these precision metering pumps?

  • To prime the pump, open the output line and slowly open the air supply valve until the pump starts.
  • Let the pump cycle very slowly until all the air is pushed out of the lines and material fills up the pump and lines.
  • Shut off the output line (material shut-off valve) and let the pump stall against pressure.

What is the advantage of elastomer (Buna-N / Viton) sealing in this pump?

The grease pump comes with an elastomer seal to keep contaminants out and protect internal components from damage.

What is the meaning of 'self-priming'?

Self-priming is needed when the pump is located below the level of the liquid and ready to be pumped. The gravity and air pressure in the pump keep it constantly filled with liquid while evacuating any air to ensure smooth operation for a continuous period.

We are here to help!

Looking for a part not listed here?