Push Nuts And Retainers

Filter
VULCAN HART -

Retainers

VULCAN HART 00-857976-00003A
VULCAN HART 00-958551-00002B
VULCAN HART 00-944144C
VULCAN HART 00-353484-00001D
VULCAN HART 00-854564-00001E
StyleModelHeightLengthWidthPrice (inc. GST)
A00-857976-00003--- SGD 489.48
RFQ
B00-958551-00002--- SGD 3.69
RFQ
A00-412691-000G1--- SGD 384.47
RFQ
A00-414369-00001--- SGD 63.55
RFQ
A00-492784--- SGD 302.94
RFQ
A00-493545--- SGD 182.83
RFQ
A00-881625--- SGD 118.87
RFQ
C00-944144--- SGD 3.74
RFQ
A706007--- SGD 47.36
RFQ
A750029--- SGD 32.50
RFQ
A750029-2--- SGD 75.53
RFQ
A753077-A--- SGD 377.04
RFQ
D00-353484-000010.55"2.45"4.9" SGD 116.20
RFQ
E00-854564-000011.55"3.8mm3.9" SGD 256.89
RFQ
DIXON -

True ID Flange Retainers

DIXON FRR-T20A
DIXON FRRE-T16B
StyleModelPrice (inc. GST)
AFRR-T20 SGD 565.13
RFQ
AFRR-T32 SGD 910.69
RFQ
BFRRE-T16 SGD 857.33
RFQ
AFRR-T08 SGD 173.85
RFQ
AFRR-T16 SGD 261.79
RFQ
AFRR-T24 SGD 512.69
RFQ
BFRRE-T12 SGD 581.60
RFQ
BFRRE-T20 SGD 1548.36
RFQ
BFRRE-T24 SGD 1043.40
RFQ
AFRR-T12 SGD 207.87
RFQ
TEXAS PNEUMATIC TOOLS -

Quick Change Retainers

Texas Pneumatic Tools quick-change retainers provide a solid chuck to securely grip bits into the barrel of an air-powered hammer while allowing tool-free bit changes. These units feature a spring-loaded collar that slides back to release the bits. They thread onto the hammer barrel for quick installation.

TEXAS PNEUMATIC TOOLS 1192-IRC4A
TEXAS PNEUMATIC TOOLS 1192-CPT3B
TEXAS PNEUMATIC TOOLS 1192-1.942C
TEXAS PNEUMATIC TOOLS 831861D
TEXAS PNEUMATIC TOOLS 4188E
TEXAS PNEUMATIC TOOLS 1291-TPT2F
TEXAS PNEUMATIC TOOLS 1291-CPT3G
TEXAS PNEUMATIC TOOLS 1291-CLE2H
TEXAS PNEUMATIC TOOLS 1291-APT2I
TEXAS PNEUMATIC TOOLS 1291-1.692J
TEXAS PNEUMATIC TOOLS 1192-IRC2K
TEXAS PNEUMATIC TOOLS 68780341L
TEXAS PNEUMATIC TOOLS 1291-1.755M
TEXAS PNEUMATIC TOOLS 9119N
TEXAS PNEUMATIC TOOLS 1291-ROT2O
TEXAS PNEUMATIC TOOLS 1291-MPT2P
TEXAS PNEUMATIC TOOLS 1291-JET2Q
TEXAS PNEUMATIC TOOLS 1291-IRC2R
StyleModelPrice (inc. GST)
A1192-IRC4 SGD 142.62
RFQ
B1192-CPT3 SGD 142.62
RFQ
A1192-CPT4 SGD 142.62
RFQ
C1192-1.942 SGD 142.62
RFQ
D831861 SGD 199.95
RFQ
E4188 SGD 199.95
RFQ
F1291-TPT2 SGD 199.95
RFQ
G1291-CPT3 SGD 199.95
RFQ
H1291-CLE2 SGD 199.95
RFQ
I1291-APT2 SGD 199.95
RFQ
D1291-1.942 SGD 199.95
RFQ
J1291-1.692 SGD 199.95
RFQ
A1192-SUL2 SGD 142.62
RFQ
K1192-IRC2 SGD 142.62
RFQ
L68780341 SGD 199.95
RFQ
M1291-1.755 SGD 199.95
RFQ
N9119 SGD 136.91
RFQ
L1291-SUL2 SGD 199.95
RFQ
O1291-ROT2 SGD 199.95
RFQ
P1291-MPT2 SGD 199.95
RFQ
Q1291-JET2 SGD 199.95
RFQ
R1291-IRC2 SGD 199.95
RFQ
P1291-GD2 SGD 199.95
RFQ
E1291-FTC2 SGD 199.95
RFQ
I1291-CPT4 SGD 199.95
RFQ
See more
APPROVED VENDOR -

Cap Nut Steel Plastic

APPROVED VENDOR 4CUJ2A
StyleModelHeightStud SizePrice (inc. GST)
A4CUJ20.44"5/16" SGD 29.37
A4CUJ40.44"7/16" SGD 12.63
A4CUJ10.44"1/4" SGD 30.59
A4CUJ30.46"3/8" SGD 29.54
A4CUJ60.645"5/8" SGD 15.03
A4CUJ50.645"1/2" SGD 14.49
APPROVED VENDOR -

Cap Nut Washer Steel 1/4 Inch, 100PK

Cap Nut Washer Steel 1/4 Inch, 100PK
ModelItemPrice (inc. GST)
228911004AD6ZMT SGD 37.15
DISCO -

Nut, Thread Cutting, 18mm Width, 7mm Height, 50Pk

Nut, Thread Cutting, 18mm Width, 7mm Height, 50Pk
ModelItemPrice (inc. GST)
1042PKAD3PBD SGD 19.50
DISCO -

Nut, Thread Cutting, 15mm Width, 6mm Height, 50Pk

Nut, Thread Cutting, 15mm Width, 6mm Height, 50Pk
ModelItemPrice (inc. GST)
1041PKAD3PBC SGD 19.89
DISCO -

Nut, Plastic, 16mm Width, 10mm Height, 50Pk

Nut, Plastic, 16mm Width, 10mm Height, 50Pk
ModelItemPrice (inc. GST)
1228PKAD3PAT SGD 15.13
DISCO -

Nut, Nylon, 9mm Width, 8mm Height, 50Pk

Nut, Nylon, 9mm Width, 8mm Height, 50Pk
ModelItemPrice (inc. GST)
1577PKAD3PAF SGD 19.00
GRAINGER -

Push On Cap Nut, Sae 1050-1065 Steel, External Type, 50PK

Push On Cap Nut, Sae 1050-1065 Steel, External Type, 50PK
ModelItemPrice (inc. GST)
230982004CG9WBT SGD 18.23
APPROVED VENDOR -

Cap Nut Washer Steel 3/8 Inch, 50PK

Cap Nut Washer Steel 3/8 Inch, 50PK
ModelItemPrice (inc. GST)
228873004AD6ZMV SGD 36.06
APPROVED VENDOR -

Cap Nut Steel Plastic 3/16 Inch, 25PK

Cap Nut Steel Plastic 3/16 Inch, 25PK
ModelItemPrice (inc. GST)
4CUH9AD6ZPL SGD 27.74
APPROVED VENDOR -

Cap Nut Washer Steel 5/8 Inch, 25PK

Cap Nut Washer Steel 5/8 Inch, 25PK
ModelItemPrice (inc. GST)
238010003AD6ZMY SGD 34.46
DISCO -

Nut, Thread Cutting, 20mm Width, 8mm Height, 100Pk

Nut, Thread Cutting, 20mm Width, 8mm Height, 100Pk
ModelItemPrice (inc. GST)
1622PKAD3PBE SGD 54.37
VULCAN HART -

Pan Retainer Channel

Pan Retainer Channel
ModelItemPrice (inc. GST)
750052-AAU6EAB SGD 701.77
See Details
VULCAN HART -

Rear Retainer Rod

Rear Retainer Rod
ModelItemPrice (inc. GST)
716922AU4VXG SGD 168.09
See Details
VULCAN HART -

Tank Retainer Bracket

Tank Retainer Bracket
ModelItemPrice (inc. GST)
701644AU3ZRF SGD 4.64
See Details
VULCAN HART -

Retainer Rack Guide Shelf

Retainer Rack Guide Shelf
ModelItemPrice (inc. GST)
00-959653-00001AP6FFK SGD 27.55
See Details
PS DOORS -

Chain Retainer

Chain Retainer
ModelItemPrice (inc. GST)
513003CE8UYG-
RFQ
PS DOORS -

Pushnut, 7/16 Inch Dia., 7/8 Inch Size, Powder Coated Yellow

Pushnut, 7/16 Inch Dia., 7/8 Inch Size, Powder Coated Yellow
ModelItemPrice (inc. GST)
513576CE8UUP-
RFQ

Push Nuts And Retainers

Push nuts and retainers protect against loosening or slipping and provide an aesthetic look to the protruding / exposed ends of threaded nuts, fasteners or bolts. These washers feature plastic / steel construction with 6 point contacts which align with the shaft circumference, ensuring maximum holding power and resistance against excessive vibration, increased torque, heat or corrosion. Texas Pneumatic Tools quick change retainers secure flat chisels and other attachments compatible with pneumatic hammers and are ideal for cutting metals, concrete or similar materials. These units can easily remove or exchange tools by pulling or releasing the sleeve. These products are available in black phosphate and zinc finish variants on Raptor Supplies.

Features

  • Push nuts and retainers are used in assemblies where fasteners may fall off without getting secured by a nut.
  • They generally have teeth or grooves at an angle perpendicular to the shaft to grip the fastener securely.
  • These teeth allow easy sliding on the shaft in one direction while resisting sliding motion in the reverse direction for superior holding power.
  • They are easy to install.
  • These retaining fasteners can temporarily hold an assembly together between assembly transits, before attaching high-strength fastening mechanisms like locknuts.
  • Texas Pneumatic Tools quick-change retainers secure bits & attachments to barrels of pneumatic hammers. They thread onto the hammer barrel for quick installation.

Frequently Asked Questions

What are some points to remember while installing push nuts and retainers?

  • The threaded fastener should have appropriate diameter tolerance. Shafts having tight shaft diameter tolerance are supplied with the required holding force by the push nut.
  • The rod should have adequate hardness (without exceeding a fixed value) to allow the locking teeth to dig in.
  • The shaft cutoffs should be rounded or chamfered for quick installation of the push retainer.

What are the differences between push-on retainers and washers?

  • Washers are ideal for distributing the load from a fastener whereas push-on retainers are suitable for preventing fasteners from loosening or slipping in assemblies.
  • Generally, washers are shaped flat. Push-on retainers are not necessarily flat and may have teeth or grooves on one of their sides to resist the motion of a fastener.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More