Specialty Threaded Studs

Filter

Specialty threaded studs are used for stabilising load-supporting structures. These studs can be used on concrete, wood or metal surfaces to temporarily create a steady base during construction operations.

MICRO PLASTICS -

Threaded Studs

MICRO PLASTICS 011032ABTS100A
MICRO PLASTICS 011032ABTS050B
MICRO PLASTICS 012520ABTS050C
MICRO PLASTICS 012520ABTS075D
StyleModelStud LengthThread SizeThread TypePrice (inc. GST)
A011032ABTS1001"10-32UNF SGD 138.74
B011032ABTS0501/2"10-32UNF SGD 77.72
C012520ABTS0501/2"1/4-20UNC-
RFQ
D012520ABTS0753/4"1/4-20UNC SGD 80.20
GRAINGER -

Fully Threaded Studs

GRAINGER 2026075A
GRAINGER 2022978B
StyleModelLengthThread SizeThread TypePrice (inc. GST)
A20260751 ft2"-4-1/2UNC SGD 403.65
A20260762 ft2"-4-1/2UNC SGD 468.00
A20260673 ft1-3/4"-5UNC SGD 206.32
B20229783 ft2-12"UNF SGD 701.33
B20260786 ft2-12"UNF SGD 1261.11

Specialty Threaded Studs

Specialty threaded studs are used for stabilising load-supporting structures. These studs can be used on concrete, wood or metal surfaces to temporarily create a steady base during construction operations.

Features

  • These studs have threads on both sides.
  • Since they are forged and cast into shape as a single piece of solid metal, they are stronger than typical bolts.
  • These studs are generally used with two heavy or regular hex nuts.
  • Fully threaded bolts apply pressure evenly along the length once they are mounted, with the most holding pressure being applied to the head.

Frequently Asked Questions

Which threads are compatible with these fully threaded studs?

ACME, ball, coil, metric, metric ball, metric rounded trapezoidal, metric trapezoidal, rounded ACME, UN, UNC, UNF and UNS.

What is thread count?

Thread count is calculated using a fastener's threads per inch (TPI). It describes the number of threads per inch along the length of a bolt or screw.

What is the difference between a stud and a bolt?

Studs are often threaded on both ends, whereas bolts frequently have an unthreaded centre region on the shaft.

How do you tighten a stud?

  • Use a wrench for tightening the lower nut against the upper nut, thus jamming them together.
  • Place a wrench on the lower nut and rotate it anti-clockwise such that the stud moves out.

What standards do these fully threaded studs comply with?

These studs adhere to DIN and ASTM standards.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More