Utility/Dewatering Pumps

Filter

Utility / dewatering pumps are used to remove or level the water table from mines, basements and backyards by the method of centrifugation. These pumps feature an impeller which creates a vortex to... Read More

LITTLE GIANT PUMPS -

Utility Pump

StyleModelPrice (inc. GST)
A556001 SGD 150.35
RFQ
B556501 SGD 455.05
RFQ
DAYTON -

Utility Pumps

StyleModelMotor TypeBody MaterialGPM of Water @ 10 Ft. of HeadRPMShaft MaterialTypeVoltageGPM of Water @ 5 Ft. of HeadPrice (inc. GST)
A4LA43-------- SGD 2846.66
RFQ
A4LA45-------- SGD 2039.88
RFQ
B5UXN0DCStainless Steel3.325000Stainless SteelCompact Flexible Impeller12 VDC3.72 SGD 334.42
B5UXL8DCNickel-Plated Brass3.325000Stainless SteelCompact Flexible Impeller12 VDC3.72 SGD 224.16
C2VAN7PSC-223450Buna NSensor Utility11530 SGD 328.97
TSURUMI -

Automatic Submersible Dewatering Pump

StyleModelGPM of Water @ 30 Ft. of HeadAmpsCord LengthGPM of Water @ 5 Ft. of HeadHeightHPLengthMaximum HeadPrice (inc. GST)
ALB-480A236.132ft.6211.25"2/311.25"39.5 ft. SGD 1442.16
BLB-800A539.650ft.8213.437"113.437"59 ft. SGD 2243.09
ZOELLER -

Utility Pumps

StyleModelHousing MaterialAmpsGPM of Water @ 10 Ft. of HeadImpeller MaterialMax. Liquid Temp.Motor TypeRPMShaft MaterialPrice (inc. GST)
A314-0002Cast iron8.022.5Thermoplastic120 FAC6000Carbon Ceramic SGD 962.85
B46-0005Plastic6 AC47Plastic104 Degrees FPSC3450Stainless Steel SGD 831.34
LITTLE GIANT PUMPS -

Utility Pumps

StyleModelPrice (inc. GST)
A505714 SGD 487.32
RFQ
A505712 SGD 411.02
RFQ
B505715 SGD 589.85
RFQ
C505723 SGD 407.90
RFQ
LITTLE GIANT PUMPS -

Dewatering/Utility Pumps

StyleModelItemAmpsCord LengthLengthMaximum HeadShaft MaterialSwitch TypeWidthPrice (inc. GST)
A505300Pump-10ft.----- SGD 359.33
B505350Pump518ft.7 45/64"--Piggyback4 19/64" SGD 400.49
C505400Submersible Utility Pump5 AC10ft.6.125"26.3 ft.Stainless SteelFloat4 5/16" SGD 338.77
D505176Utility Pump5 AC18ft.6 1/16"26 ft.VitonManual4 5/16" SGD 262.31
DAYTON -

Plug In Utility / Dewatering Pumps

Dayton plug-in utility / dewatering pumps are used to transfer moderate amounts of water in areas where electrical outlets are not present. They feature stainless steel / polypropylene construction to resist chemicals & moisture. These pumps drain standing water down to 3/8 inches depth, for dewatering window wells, basements, ponds, stock tanks & rooftops. They are equipped with double ball bearings to bear radial & axial loads in both directions, and are available in cord lengths of 10 & 20 feet.

StyleModelGPM of Water @ 25 Ft. of HeadAmpsBase MaterialGPM of Water @ 30 Ft. of HeadGPM of Water @ 5 Ft. of HeadHeightHousingHousing MaterialPrice (inc. GST)
A3YU54-1.5 ACPolypropylene-16.710.5"PolypropylenePolypropylene SGD 209.49
A3YU55-2.6 ACPolypropylene-32.910.5"PolypropylenePolypropylene SGD 281.31
B1XHV4274.7 AC304 SS137416 5/16"Stainless SteelStainless Steel SGD 1232.84
B1XHV55311.3 AC304 SS459018.125"Stainless SteelStainless Steel SGD 2065.69
LITTLE GIANT PUMPS -

Pony Pumps

StyleModelPrice (inc. GST)
A555110 SGD 384.91
RFQ
B555111 SGD 493.16
RFQ
A555113 SGD 403.84
RFQ
B555203 SGD 358.84
RFQ
A555112 SGD 368.87
RFQ
C555602 SGD 342.81
RFQ
LITTLE GIANT PUMPS -

Submersible Sump Pumps, Ball Bearings, 20 Feet Cord Length

Little Giant submersible sump pumps are designed for removing standing / accumulated water from a sump basin in the basement or crawl space and transfer water to the sewer line. These units come with stainless steel housing for handling corrosive fluids and semi-open impeller design for handling liquids with solid particles. They are completely submerged underwater and start operating the motor automatically when the sump pit water rises to an emergency level and stops the pump when the water has drained down to normal level. Choose from a wide range of these submersible sump pumps, available in 12 and 14 inch heights.

StyleModelGPM of Water @ 30 Ft. of HeadAmpsCord SizeGPM of Water @ 5 Ft. of HeadHandleHeightHPImpeller MaterialPrice (inc. GST)
A620240225 AC16/358Thermoplastic12"1/2Rubber SGD 1282.12
B6202415410 AC14/380Stainless Steel14"1Ductile Iron SGD 1613.76
TSURUMI -

Construction Site/Residential Dewatering Pump

StyleModelGPM of Water @ 20 Ft. of HeadAmpsBase MaterialGPM of Water @ 25 Ft. of HeadGPM of Water @ 30 Ft. of HeadGPM of Water @ 40 Ft. of HeadGPM of Water @ 5 Ft. of HeadHeightPrice (inc. GST)
AHS2.4S-62355.4 ACPVC2820-5312 15/16" SGD 826.33
BHSZ2.4S-62355.4 ACPVC2820-5315.125" SGD 977.13
CHSD2.55S-62407.5Steel332585815.375" SGD 1820.75
DLB-480446.1Steel3623-6211.25" SGD 1084.21
ELSR2.4S-60446.1Rubber3424-6211.375" SGD 1285.06
FHS3.75S-62559.6PVC5146356015.25" SGD 1606.98
GHSZ3.75S-61559.6PVC5146356017.5" SGD 1671.35
HNK2-2211413Steel1101049213024.5" SGD 5858.81
INK2-22L18013Steel17015212021126.5" SGD 7097.53
TSURUMI -

Submersible Dewatering Pump

StyleModelGPM of Water @ 30 Ft. of HeadAmpsCord SizeGPM of Water @ 40 Ft. of HeadGPM of Water @ 5 Ft. of HeadHeightHPImpeller MaterialPrice (inc. GST)
ALB-800539.614/3378213.437"1Urethane Rubber SGD 1707.40
BLB-15008426.212/37011123 5/16"2High Chrome SGD 5140.30
DAYTON -

Plug In Utility Pumps, Stainless Steel Base

Dayton plug-in utility pumps are used for draining excess rainwater from window wells & stairwells, and removing standing water from yards & flooded basements. These pumps feature a stainless steel base for structural rigidity and 3-conductor SJTOW cords that are resistant to oil & water. They are integrated with dual ball bearings for less rotational friction while running at a maximum speed of 3450 rpm. These dewatering pumps are capable of withstanding liquid temperatures up to 104 degrees F.

StyleModelGPM of Water @ 5 Ft. of HeadAmpsDiameterHeightHPLengthMaximum HeadWidthPrice (inc. GST)
A11C685213.25.625"10.625"1/410.625"20 ft.5.62" SGD 446.58
B11C686767.56.5"15"1/315"32 ft.6.5" SGD 460.74
B11C6878311.46.5"16 15/16"1/216 15/16"35 ft.6.5" SGD 523.04
MILWAUKEE -

Cordless Transfer Pump, 18 V, 8 Gpm, 75 Ft Of Head, Bare Tool, 3/4 Inch Ght Male

ModelItemPrice (inc. GST)
2771-20CT3PWN SGD 515.05
APACHE HOSE & BELTING CO INC -

Poly Suction Strainer, 2 Inch

ModelItemPrice (inc. GST)
70002780CN8LUN SGD 17.76
APACHE HOSE & BELTING CO INC -

Round Hole Suction Strainer, 1-1/2 Inch Size

ModelItemPrice (inc. GST)
70000008CN8LUP SGD 25.07
APACHE HOSE & BELTING CO INC -

Round Hole Suction Strainer, 2 Inch Size

ModelItemPrice (inc. GST)
70000504CN8LUQ SGD 36.26
APACHE HOSE & BELTING CO INC -

Round Hole Suction Strainer, 3 Inch Size

ModelItemPrice (inc. GST)
70001500CN8LUR SGD 48.85
EDSON -

Suction Strainer, 3 Inch Size FNPT, Side Round, Bronze

ModelItemPrice (inc. GST)
11130CP4CPY SGD 875.07
LIBERTY SAFE -

Pump Accessory Kit

ModelItemPrice (inc. GST)
K001499CR9JEW SGD 88.50
MILWAUKEE -

Cordless Transfer Pump Kit, 18 V, 8 Gpm, 75 Ft Of Head, Bare Tool/Battery

ModelItemPrice (inc. GST)
2771-20, 48-11-1835CT3NCZ SGD 799.36
MILWAUKEE -

Water Pump, 12 V, 9 gpm, 15 ft of head, Bare Tool, 3/4 Inch Size GHeight Male

ModelItemPrice (inc. GST)
2579-20CT3QBB SGD 385.02
12

Utility/Dewatering Pumps

Dewatering pumps are used to remove or draw groundwater from mines, basement and backyard, as well as reduce flooding by the method of centrifugation and level the water table. Raptor Supplies offers a wide range of these utility / dewatering pumps from brands like Allegro, Dayton, Little Giant Pumps, Tsurumi and Rule. These pumps feature an impeller which creates a vortex to suck the air out of the hose and, as a result, forces the water to rise to the pump with the help of atmospheric pressure. These horizontally installed pumps use electric motors with a maximum 3 HP power rating and come with a mechanical seal to prevent water ingress. These pumps are available in cord lengths ranging from 8 to 50 inches on Raptor Supplies.

Features

Allegro Dewatering Pumps :

  • Allegro Safety dewatering pumps are equipped with a semi-vortex impeller made of urethane rubber with an ethylene propylene rubber casing for lightweight and efficient pumping and handling of sludge, even in challenging environments.
  • They feature double inside mechanical seals with silicon carbide faces providing a reliable and secure seal between the impeller and the shaft for leakproof connection.
  • These sludge dewatering pumps utilise a 403 stainless steel sleeve shaft for excellent strength, corrosion resistance and durability.
  • They further feature C3 ball bearings to withstand high temperatures and provide a long B-10 life of 60000 hours, ensuring smooth and reliable operation.
  • These dewatering pumps have NBR (Nitrile Buna Rubber) elastomers which provide excellent resistance to oil, fuel and other chemicals ensuring a tight and reliable seal, enhancing the overall performance and durability of the pumps.

Dayton Utility / Dewatering Pumps :

  • Dayton plug-in utility / dewatering pumps are used to transfer moderate amounts of water in areas where electrical outlets are not present.
  • They feature stainless steel / polypropylene construction to resist chemicals & moisture, ensuring long service life.
  • These pumps are equipped with double ball bearings to bear radial & axial loads in both directions and are available in cord lengths of 10 & 20 feet.

Tsurumi Submersible Dewatering Pumps :

  • Tsurumi submersible dewatering pumps are constructed with a durable steel base material, ensuring strength and stability during operation.
  • These pumps feature a 3-conductor STOW cord that is specifically designed to resist water and oil, allowing the pump to be submerged and operated in water without compromising safety or performance.
  • They are designed for continuous duty operation allowing them to run continuously without the need for frequent stops or cool-down periods, ensuring uninterrupted dewatering performance.

Frequently Asked Questions

What maintenance is required for dewatering pumps?

  • Clean the pump and hoses regularly to eliminate debris, sediment, or blockages that may hinder the pump's effectiveness.
  • Inspect the intake and discharge hoses of the pump for any indications of damage, such as cracks or leaks. Replace any impaired hoses as necessary.
  • Examine the impeller or propeller of the pump for any obstructions or signs of wear. Clean or replace the impeller if required.

Do these sludge submersible dewatering pumps offer motor protection?

Yes, Allegro Safety dewatering pumps have built-in thermal and amperage sensing protectors to prevent motor failure due to overloading or accidental run-dry conditions. This protection adds an extra layer of safety and helps prolong the lifespan of the motor.

In what cord lengths are these dewatering pumps available on Raptor Supplies?

These pumps are available in cord lengths ranging from 8 to 50 inches on Raptor Supplies.

What is the maximum liquid temperature permissible in dewatering pumps?

They can withstand liquid temperatures up to 150 degrees F.

We are here to help!

Looking for a part not listed here?