CONRADER Throttle Control Engine

Conrader throttle controls are ideal for controlling the engine speed in gas engine-powered compressors during continuous run operations. They can save fuel and increase the operating life of the ...Read More

Filter
Spring Material: Stainless Steel , Type: Gas Engine Driven
StyleModelCable LengthCable MaterialFitsItemPrice (inc. GST)
A
TCSP-H-5565-B
-Stainless SteelHonda Engines 5-1/2 to 6-1/2 HPAirline Throttle Control SGD 46.47
B
TCSP-H-1113-B
-Stainless SteelHonda Engines 11 to 13 HPAirline Throttle Control SGD 59.30
C
TCXLIW-CH440
-Filled NylonKohler 14 hpThrottle Control SGD 79.77
D
TCSP-H-0809-B
-Stainless SteelHonda Engines 8 to 9 HPAirline Throttle Control SGD 59.79
E
TCSA-5565S-SC
-Filled NylonHonda GX160Throttle Control SGD 32.00
F
TCXLPW-24
24"Filled Nylon-Throttle Control SGD 70.58
F
TCXLPW-36
36"Filled Nylon-Throttle Control SGD 75.16
F
TCXLPW-48
48"Filled Nylon-Throttle Control SGD 78.25
F
TCXLPW-54
54"Filled Nylon-Throttle Control SGD 75.68

Working Mechanism

  • When the attached compressor attains the unload (cut-out) pressure, the pilot valve installed with these throttle controls sends a pneumatic signal to the air throttle control for actuating & extending to decrease the engine speed.
  • When the compressed air is used & the compressor obtains the load (cut-in) pressure, the pneumatic signal from the pilot valve retracts the throttle control to let the engine go back to its normal operating speed.

Features

  • Conrader air throttle controls are available in cable & airline styles.
  • Conrader cable-style throttle controls are installed on the pilot valve or other locations on the compressor while their cable end is attached to the engine throttle arm.
  • They have brass construction with stainless steel springs, Viton seals & a stainless steel cable that is permanently lubricated & self-cleaning.
  • Users should use routing clamps to securely mount the cable.
  • Conrader airline-style throttle controls are installed on the engine and attached to its throttle. The control's airline tube is positioned between the pilot valve & the throttle control.
  • They have brass construction with stainless steel springs, Viton seals, a stainless steel wire rod & plated steel brackets.
  • Selected models act as Honda air compressor throttle controls to regulate speeds of 5.5 to 13 hp Honda engines. Conrador TCXLIW-CH440 throttle control is suitable for use in 14 hp Kohler engines.
  • Conrador TCSA-5565S-SC throttle control is suitable for use in Honda GX390 engine. This Honda GX390 throttle control has a stroke length of 0.40 inches.

Frequently Asked Questions

What is the operating temperature of these Conrader throttle controls?

These Conrader air throttle controls operate at temperatures ranging from -15 to 400 degrees F.

What type of connections are available in these Conrader throttle controls?

Most of these Conrader air throttle controls have a 1/8 inch male NPT inlet connection and a 1/4 inch compression tube outlet connection.

What is the pressure rating of these Conrader throttle controls?

These Conrader air compressor throttle controls for petrol (gasoline) & diesel engines can operate at a maximum pressure of 500 psi.

We are here to help!

Looking for a part not listed here?