DAYTON 1/3 HP Turbine Pumps

Filter
Bearing Type: Ball , Best Efficiency GPM @ Head: 1.0 @ 85 Ft. , Best Efficiency Range GPM @ Head: 55 - 110 @ 1.7 - 0.6 Ft. , Construction: Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. , Drain Plug: Easily Accessible at Bottom , Duty: Continuous , Frame: 56J , GPM: 0.9 , GPM @ 20 PSI: 2.6 , GPM @ 40 PSI: 2 , Height: 6.3" , Housing Material: Cast Iron with nickel plating , HP: 1/3 , Hz: 60 , Impeller Material: Bronze , Impeller Type: Open , Inlet: 3/4" , Inlet Pressure: 150 PSI , Length: 13.2" , Max. Case Pressure: 200 PSI , Max. Fluid Viscosity: 100 SSU , Max. Liquid Temp.: -20 to 230 Degrees F , Max. Pressure: 140 psi , Max. Specific Gravity: 1 , Motor Enclosure: ODP , Motor RPM: 3450 , NEMA/IEC Frame: 56J , Outlet: 3/4" , Screw Material: Zinc Plated , Seal Application: Long life When not Run Dry or Pumping Abrasives , Seal Material: Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring , Seal Type: Mechanical Seal , Service Factor: 1.75 , Shaft Material: 304 Stainless Steel , Volute Material: Cast Iron with Nickel Plating , Wetted Materials: Bronze, Cast Iron,Buna-N, Carbon, Ceramic and 316 Stainless Steel , Width: 6.5"
StyleModelAmpsMotor TypePhaseVoltagePrice (inc. GST)
A
4JPF2
1.5-1.4/0.73 Phase3208-230/460 SGD 1,295.29
B
4JPF1
7.5/3.8Capacitor-Start, Induction Run1115/230 SGD 1,560.55

1/3 HP Turbine Pumps

Dayton turbine pumps are suitable for industrial applications like pressure service, water treatment, boiler feed, condensation return, reverse osmosis filtration and spray equipment. They are equipped with type 21 mechanical seals and a reachable drain plug with ball bearings on shaft for extended life. Choose from a range of these turbine pumps available in 0.9 and 1.2 GPM flow rates on Raptor Suppies.

We are here to help!

Looking for a part not listed here?