Item | Turbine pump |
Amps | 6.0-5.8/2.9 |
Bearing Type | Ball |
Best Efficiency GPM @ Head | 15.5 @ 75 Ft. |
Best Efficiency Range GPM @ Head | 40 - 80 @ 19.4 - 14.9 Ft. |
Construction | Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. |
Drain Plug | Easily Accessible at Bottom |
Duty | Continuous |
Frame | 56J |
GPM | 7.4 |
GPM @ 10 PSI | 22.5 |
GPM @ 20 PSI | 21.5 |
GPM @ 30 PSI | 20.5 |
GPM @ 40 PSI | 19.4 |
GPM @ 50 PSI | 18.3 |
GPM @ 60 PSI | 17.2 |
GPM @ 75 PSI | 15.5 |
GPM @ 80 PSI | 14.9 |
Height | 7.1" |
Housing Material | Cast Iron with nickel plating |
HP | 2 |
Hz | 60 |
Impeller Material | Bronze |
Impeller Type | Open |
Inlet | 1-1/4" |
Inlet Pressure | 138 PSI |
Length | 15.35" |
Max. Case Pressure | 200 PSI |
Max. Fluid Viscosity | 100 SSU |
Max. Liquid Temp. | -20 to 230 Degrees F |
Max. Pressure | 100 psi |
Max. Specific Gravity | 1 |
Motor Enclosure | TEFC |
Motor RPM | 3450 |
Motor Type | 3 Phase |
NEMA/IEC Frame | 56J |
Outlet | 1" |
Phase | 3 |
Screw Material | Zinc Plated |
Seal Application | Long life When not Run Dry or Pumping Abrasives |
Seal Material | Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring |
Seal Type | Mechanical Seal |
Service Factor | 1.2 |
Shaft Material | 304 Stainless Steel |
Shaft Size | 5/8" |
Type | Centrifugal |
UPC | 190735327159 |
Voltage | 208-230/460 |
Volute Material | Cast Iron with Nickel Plating |
Wetted Materials | Bronze, Cast Iron,Buna-N, Carbon, Ceramic and 316 Stainless Steel |
Width | 8.8" |