This piano box offers a full storage solution for tools & supplies. It has a built-in, 44-inch-wide, 12-gauge steel ramp to easily load large & bulky items.
Features:
- This job box has a storage capacity of 57.5 cubic feet.
- It has full-width interior shelves that allows you to organise and protect tools.
- This cabinet comes with bi-fold cover that opens upwards and folds completely out of the way for easy interior access.
- It offers tan powder-coat finish to resist corrosion on exposed surfaces.
- This heavy-duty piano hinge eliminates break-in and theft.
- It is integrated with a lock system with recessed 7-gauge lock housing to enhance the unit's security.
- This unit comes with recessed handles to prevent damage during shipping.
- It features a grommeted, weatherproof electrical pass-thru to power the interior of the gang box.
- This cabinet has spring guards to protect against damage caused by shifting loads during transportation.
- It further features 7-gauge, 4-way skids to access this jobsite storage box from all sides.
Frequently Asked Questions:
Q. How do you remove & replace the gas spring on this cabinet?
A.
- Begin by propping up the cover with a piece of wood.
- Remove the lower ball stud nut after loosening it. Access the ball stud's hex through the slot in the gas spring guard and tighten with one wrench while holding the ball stud with another.
- Insert the screwdriver blade into the notch and under the spring clip to remove the gas spring from the cover ball stud. Pry the clip up until the ball stud is released, then remove the spring.
- To avoid accidental cover closure, double-check the piece of wood support holding the cover.
- Remove the ball stud from the old gas spring and insert it into the lower ball stud connector of the new gas spring.
- Insert the ball stud on the rod end of the gas spring through the gas spring guard from the inside.
- Attach the ball stud. Simply push it into the upper ball stud while supporting the cover with your other hand to connect.
Q. What tools are required to install the unit?
A. To install it, you only need a slotted flat blade screwdriver & two 1/2 inch open-end wrenches.
Q. What is the height of this piano box?
A. When the unit is open, it has a height of 78 inches. While closed, it has a height of 49 inches.
Change Country
