Flat Shipping

Flat Shipping at SGD 19.99 + GST

On orders above SGD 150.00

*T&C Apply

VESTIL EPC-10 Vertical Plate Clamp, 1000 Lb. Capacity

In Stock
Item: AG7RPG Model: EPC-10
Shipping to

Get it by Apr 5, Friday

Product available for flat shipping. Flat shipping price of SGD 19.99 on transactions of value SGD 150 or more and weight below 5 pounds on selected products across the platform.

SGD 326.87 /unit (inc. GST)
Add To Cart
Request a Quote

Payment Methods

Delivery Partners

Product Specifications:

ItemPlate Clamp
Bale Opening1 13/16"
Clamp Lock MechanismAutomatic Locking
ColorBlue
Height8.562"
Jaw Depth1.6"
Length4.125"
Lifting Clamp StyleVertical
Lifting Clamp TypePlate Clamp
MaterialSteel
Max. Compatible Plate Thickness0.6"
Max. Jaw Opening1.8125"
Measuring UnitsEACH
Overall Depth8.07"
Overall Height4.13"
Overall Length4.13"
Overall Thickness1.73"
Overall Width1.75"
Plate Thickness19/32"
Ring Dia.1.18"
Throat Depth1.6"
UPC691215054515
Width1.75"
Working Load Limit0.5 ton.

Shipping Info:

Ship weight (kg) 2.25
Ship height (cm)21.75
Ship length (cm)10.48
Ship width (cm)4.45
HS code7326908588
Country of OriginCN

Working Mechanism:

  • Properly inspect the plate clamp before attaching it to a hoisting device using a safety hook with an automatically closing latch.
  • Rotate the latch lever clockwise to unlock the clamp and position it above the workpiece.
  • Press the clamp onto the workpiece's top edge till the top edge touches the back of the clamp mouth. Rotate the latch lever counterclockwise to lock the clamp.
  • Raise the workpiece a few inches above the ground to confirm that it can balance when suspended. Reposition the clamp if required to improve the balance. Users can connect multiple clamps if the workpiece cannot be balanced using only one plate clamp.
  • Lift the workpiece to a height and move it to the application area without touching the lock lever.
  • Rotate the latch lever clockwise again to release the load. Disconnect the clamp from the hoist hook after use.

Compatible Accessories:

  • Vestil HOOK-S-4 Swivel Hook: These swivel hooks come with a clevis and are used to lift vertical clamps using a hoist.

Standards and Approvals:

  • ASME B30.20
  • OSHA

Frequently Asked Questions:

Q. What are the factors responsible for the proper working of this plate clamp?

A.

  • This plate clamp is used mostly on steel sheets. It is not designed for stainless steel or aluminium plates.
  • The sheet / plate must weigh at least the minimum uniform plate weight (MUPW) of the clamp. This Vestil EPC-10 plate clamp having 1000 lb capacity has a MUPW of 200 lb.
  • The plate being lifted must be clean and free of oil.
  • Lifting plates / sheets of the same thickness can cause wear in a specific region of the clamp gripper. Replace the clamp if required.

Q. What are the lifting rules to follow while operating this plate clamp?

A.

  • Users should not lift any material over themselves or other people working nearby. Clear the area and move the workers away before moving the loads.
  • They should stabilise the loads while raising, lowering or moving them by standing at arm's length to the side of the material and holding the attached hoist hook or clamp bale.
  • Always maintain the load level without swinging or rotating.

Documentation:

Product Variants

ProductModelOverall ThicknessBale OpeningJaw DepthOverall WidthPlate ThicknessThroat DepthWorking Load LimitMax. Compatible Plate ThicknessPrice
VESTIL EPC-20 Vertical Plate Clamp, 2000 Lb. Capacity | AG7RPH
EPC-202.56"2 3/8"2.9"2.38"25/32"2.9"1 ton.0.8" SGD 527.37
VESTIL EPC-40 Vertical Plate Clamp, 4000 Lb. Capacity | AG7RPJ
EPC-402.56"2 3/8"2.9"2.69"1"2.9"2 ton.1" SGD 728.00
VESTIL EPC-80 Vertical Plate Clamp, 6600 Capacity | AG7RPK
EPC-803.54"2 3/8"3"4"1 3/16"3"3.3 ton.1.88" SGD 1,091.14

Contact us

Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 09:00 until 17:00.

VESTIL EPC-10 Vertical Plate Clamp, 1000 Lb. Capacity
SGD 326.87 /unit (inc. GST)