DAYTON 2EAX5 Whole House Fan 24 Inch 115 Volt

Dayton 2EAX5 whole house fan has a blade diameter of 24 inches. It is mounted on the ceiling to draw out hot & humid air and deliver cool air to ventilate spaces.

Working Mechanism:

• Turn the fan speed switch to the high-speed position for rapid cooling.
• Start the fan by setting the timer to the desired time setting or to allow continuous operation.
• Switch to low speed for quiet operation or to maintain continuous air movement.
• The shutter will open and close automatically.

Features:

• Dayton 2EAX5 whole house fan is equipped with a belt-driven motor that offers great flexibility in terms of speeds (up to 560 rpm) as the motor is not directly in contact with the fan's moving parts.
• It features galvanised steel construction with 4 deep-wing, steel-bladed propellers for maximum air movement.
• This unit has a gasket between the plenum box and Venturi to minimise noise.
• It comes with an automatic belt tensioning system to remove manual belt adjustment functions.
• The rubber-mounted, sealed fan shaft bearing minimises the friction between moving and rotating parts for smooth operation.

Compatible Accessories:

• Dayton 4C224 Fan Shutters: They eliminate joist cutting.

Frequently Asked Questions:

Q. What tools are required for installing this fan?

A.

• Hammer
• Utility knife or sheetrock saw
• Power or handsaw
• Pencil
• Framing square
• Straight edge
• Measuring tape
• Screwdriver
• Safety goggles
• Power or hand drill

Q. Where should this fan be located?

A. The fan should be installed near the central part of the room (preferably in the hallway or corridor) so that air may be drawn through the entire area.

Q. What are the points to consider before using this fan?

A.

• Open at least one window or door so that the fan can draw outside air in.
• During maintenance, make sure that the electrical service to the fan is locked in the OFF position.
• Do not rotate the fan by pulling on the V-belt as it may result in the entrapping of the fingers between the V-belt and pulley.
• Before activating the fan, ensure that there are no obstructions in the way of propeller operation.
• Do not operate this fan until the shutter is installed.