PARKER

Compact, one-piece fittings with a push-on construction; used in pneumatic fluid handling and low-pressure applications. Available in tapered and beaded barb styles

Suitable for applications in plumbing and electrical conduit systems to connect two pipes or tubes with hot- and cold-water faucets. Available in different materials and connection types

An extensive line of reliable and leak-proof flared tube fittings, such as caps, nuts, elbows, adapters, unions and connectors, used in various high-pressure hydraulic applications. Available in different connection types and hex sizes to fit a variety of pipes

Integrated with a tough, custom-molded, blow-out resistant seat with a back-stopped poppet to reduce the spring stress. 100% factory tested for both crack and reseat capacities. Available in male and female NPT, CPI, A-LOK, UltraSeal, VacuSeal, BSP, SAE and Seal-Lok variants

Perfluoroalkoxy (PFA) constructed tube fittings for side-loading applications; high resistance to chemicals & extreme temperatures. Provide a leak-tight connection in UHP semiconductor manufacturing applications. Available in nipple reducer and plug variants

Parker PEFR Series polyethylene tubing ideal for pneumatic controls in HVAC systems. UL 94 V-2 listed for excellent flame resistance. Can operate at a maximum pressure of 185 PSI. Compatible with Parker Fast & Tite, Prestolok brass and Dubl-Barb units

Includes adapters, service kits and replacement blades for push-to-connect tube fittings. Service kits used for maintaining, repairing & replacing Parker couplers & nipples. Prevent leakages & extend coupling life. Ideal for air, hydraulic and steam couples & nipples

FDA-compliant push-to-connect metal and plastic fittings with a stainless-steel grab ring and a maximum working temperature of 200 degrees Fahrenheit

Designed to speed up thermoplastic tubing / pipeline installation services. Feature black acetal copolymer construction that resists ultra-violet ray attacks and offers excellent dimensional stability. Equipped with a knurled nut for ease of hand tightening mechanism

Includes pipe nipples for air, gas and liquid service applications. Feature brass construction capable of handling fluid pressure up to 4000 PSI and resisting corrosion. NPT connections provide easy installation in pipelines. Loctite Vibra-Seal thread sealant for leakproof operation

Deliver safe and flexible fluid conveying applications in restricted spaces. Feature abrasion-, heat- and oil-resistant nylon construction capable of handling highly pressurised systems and exhibiting low-level water absorption rates

Exhibit chemically inert, odorless, taste-less, non-wetting and non-leaching properties ideal for fluid and material handling applications. Also, ensure no process contamination while transferring chemicals for improved production runs

Breakaway clamps designed for 1/2 inch agricultural quick couplings having 1-1/2 inch diameter push-pull sleeves. Push-pull sleeves allow the coupler and tip to be disconnected easily during a breakaway. Available in single and double acting sleeve variants

Flexible, kink-resistant tubings featuring medium- and heavy-duty durometers for delivering the capacity to handle high pressure loads and excellent hydrolytic stability. Available in multiple colours for system identification and coding

High-temperature tubings provide excellent vibration damping properties at both sonic and ultrasonic frequencies. Featutre fluoroplastic construction designed in accordance with AMS 3653 requirements

Provide leak-free pipe connections in instrumentation processing applications. Can withstand pressures ranging from 3000 to 10000 psi. Made of ASTM bar stock and close grain forgings. Available in a variety of thread forms

Designed to reduce harmful effects of mechanical shock and strong vibrations in fluid power systems. Equipped with a polypropylene cushion to eliminate rubbing and chafing which may lead to leakage, malfunction and downtime

Filter vessels compatible with single- / double-length bags for filtering water, cutting oils, solvents & coolants. Feature a swing bolt for easy opening or closing of the bag and standard threaded FNPT vent and drain connections

Suitable for process liquid filtration applications requiring removal of solids. Compatible with industrial-grade inks, paints and coatings in food & beverage industries. Engineereed and tested under the strictest quality control standards to assure a consistent performance

Designed for use in filter housings to remove unwanted sediments and chemicals. Available pleated filter, string-wound filter, blanket-wound filter and solid cartridge variants

Lightweight vessels integrated with swing bolts for delivering fast, easy opening and closing services. Come equipped with zinc-plated legs for maintaining structural integrity and reducing the oxidation reactions in exposed surfaces

Includes a wide variety of O-ring sets and gasket sets to help remove, repair, and install water filtration systems

Help protect work areas by confining and isolating infectious and hazardous material in vacuum systems, vents and exhaust lines. Feature a polypropylene housing for a leak-free performance and preventing aerosol corrosion

Capable of meeting the functional requirements of SAE J530 and SAE J531 standards. Have a maximum operating pressure of 5600 psi and are compatible with copper and brass tubes and iron pipes

Ideal for process control and instrumentation connections in gas and liquid applications. Available in different connection types in both metric and SAE sizes

PFA constructed pipe fittings for providing leak-proof operation in side-loading and vibration applications, with high resistance to chemicals and extreme temperatures. Includes bushings, plugs, elbows, couplings, nipple reducers, nipples, tees & female reducers

8200 Series double shut-off, quick pipe couplings for connecting couplers and nipples. Push to connect mechanism for easy installation. Feature locking balls for secure fit and steel construction to withstand a maximum pressure of 3000 PSI. Available in NPSF and ORB connection ends

Corrosion-resistant adapters, plugs, elbows and tees with a maximum operating temperature of 1200 degree Fahrenheit. Ideal for use with water, natural gas, hydraulic oil and cryogenic gases

Parker valves designed to maintain and regulate high volume and high pressure liquid flow. Available in stainless steel, PFTE and brass and in different connection types

Integrated with either internal or external seats suitable for low-pressure applications with gas, oil and water. Feature a hand tightening mechanism to provide a metal-to-metal seal and inline body style with threaded connections and a tee handle

Designed to comply with requirements of ANSI/ASME B16.34 standards. Feature a two-piece body with minimal leakage paths and a floating ball with dynamic response seats. Facilitate inherent self relief mechanism and integral compression style for eliminating taper threads & thread sealants

Offer positive shut-off, high flow capacity and quick quarter-turn operation in a compact, barstock body. Feature a patented blow-out resistant seat for reliable sealing at a wide range of operating pressures, usually uncommon in general-purpose plug valves

Ideal for semiconductor, ultra-pure water and aggressive chemical or gas applications. Feature a molded PFA body with precision machined sealing areas for higher chemical resistance and PTFE diaphragm for excellent flexibility, a high cycle life and less downtime

Designed for regulating fluids in process, power generation and instrumentation applications. Restrict or allow the fluid flow by using a slender needle-shaped plunger which fits in a conical seat

Engineered for use in highly pure semiconductor, ultra-pure water and aggressive chemical processing applications. Feature a molded PFA body with precision machined areas and one-piece machined & modified diaphragm for superior flexibility

Capable of handling pressures ranging from 10 to 3500 psig. Can be installed either between a high-pressure source at the inlet and a pressure regulator, or in low-pressure delivery lines and a process chamber

Integrated with a threadless design and low internal volume to reduce particle generation and purge time, respectively. The close tolerances and tight alignment facility of the moving components minimise hysteresis and improve the cycle life

Operate on a quarter-turn mechanism, using a wrench, to ensure a leak-tight seal up to the rated pressure. Feature a hex cap to aid finger-tight or wrench-assisted closure and a crimped cap to resist accidental disassembly

Designed to prevent the reverse flow of hot or cold polluted water from entering into the potable water supply. Available in stainless-steel, acetal-resin copolymer, brass, Kynar and PTFE variants

Designed to control the flow and pressure of fluids in hydraulic systems. Ideal for controlling valves remotely in a normally closed or open position until an electrical signal is passed. Capable of providing a maximum flow rate of 15 gallons/minute

Hydraulic cartridge valve bases ideal for individual piping of threaded cartridge valves, bodies & coils. Provide the ability to scale the appropriate cartridge valves for optimal flow, low leakage poppet-type valving and float / motor functions. Available in steel & aluminium variants

Includes cartridge valves, assemblies, shuttle valves, solenoid valves and threaded cartridge valves. Designed to control the flow and pressure of fluids in hydraulic systems. Ideal for controlling the valves remotely in a normally closed or open position until an electrical signal is passed

Flow control valves designed to provide precise flow control in one direction and free flow in the reverse direction. D1VW Series directional control valves featuring DC surge suppression mechanism for suppressing external voltage spikes and proportional spools for controlling pressures up to 5000 PSI

Hydraulic manifold valves designed to regulate fluid flow and pressure in hydraulic systems. Allow the operator to control valve opening time remotely. Hydraulic directional control valves control the direction of flow. Available in CETOP-03, CETOP-05, D03 & D05 sizes

3-Way / 2-Position hydraulic manual selector valves designed for directing the incoming flow in the desired direction in hydraulic circuits. Ideal for agricultural, forestry & turf equipment. Feature manual actuation via a hydraulic valve knob

Pneumatic manual control valves with fluorocarbon seals and a stainless-steel spool. Can withstand high temperatures and are ideal for chemical applications. Available in 3-way, 2 / 3-position and 4-way 2 / 3-position air valve variants

Compressed air operated pneumatic control valves suitable for fluid flow regulation in medical, processing, automotive servicing and refining applications. CE marked to ensure reliability; selected models come with NEMA 4 rated enclosures for leak-tight seal and abrasion resistance

High-quality Parker solenoid valves featuring low friction breakaway and low wear. Ideal for medical, aerospace, pneumatic and hydraulic applications

Includes various solenoid valve manifold service kits, such as coil kits, manual operator kits, repair kits, seal kits and mounting kits with different valve replacement parts

Aluminium / zinc air regulators featuring a manually operated, non-rising knob to control the fluid pressure coming out of the compressor. Can handle temperatures and pressures up to 175 degrees F and 300 psi, respectively

Compressed air filter elements of grit sizes ranging from 0.01 to 40 microns. Used to filter out rust, pipe scale, compressor lube oil and water from compressed gases

Microfibre / polypropylene filters designed to remove up to 99.99 percent of the 0.01-micron particles of oil, water and dirt from compressed air. Feature a nylon / zinc housing to withstand harsh environments

Particulate filters / regulators offer precise pressure control and high moisture removal efficiency. Feature a one-piece design to decrease installation space and piping by incorporating two units into one. Equipped with a fingertip ratchet control for accurate oil drip rate adjustment

Used for injecting oil mist into flowing air streams of pneumatic devices, such as cylinders, valves and motors in factory automation, food & beverage and packaging industries. Feature a precision needle valve for allowing repeatable oil deliveries and multiple adjustments of the desired flow rates

Wide range of installation accessories, such as automatic drains, metal bowl kits and mounting brackets best suited for use with pneumatic filters, regulators and lubricating systems

Includes a wide range of single and double acting round Parker pneumatic cylinders in different mounting options, bore diameters and overall lengths. Ideal for taking objects on or off conveyor belts, opening valves and lifting heavy objects

Brass / polyamide / steel / heat-treated aluminium fittings designed for use with aluminium pipes of sizes ranging from 0.75 to 2 inches

Parker pneumatic fittings designed for applications in manufacturing, packaging and transportation industries for fast connection and disconnection of pipes and equipment. Available in steel and brass and in different connection types

Flexible hose coupled assemblies designed for air tools, compressors, manufacturing equipment & general industrial applications. Feature polyamide coupling material for dimensional stability & good chemical resistance, can easily fit 25 / 40 mm ports and are offered in abrasion-resistant thermoplastic & flexible rubber variants

Repair kits for adjusting, checking or filling nitrogen into hydraulic accumulators. Consist of different adaptors for secure accumulator connections and are supplied in a foam-filled plastic case for easy portability & extra protection

Designed to protect, isolate and discharge a hydraulic accumulator operating at pressures up to 350 bar. Available in 125 and 250 gpm variants

Steel toolboxes with organised and accessible tool storage providing maximum safety in harsh conditions. Feature fully extended drawers with storage capacity up to 2584 cu inch for various jobsite applications. Available in folding top & side handle designs for heavy handling and transportation

Integrated with a systematic bottom-loading design to handle long hose assemblies. Feature linked dies to prevent segments from being misplaced or mismatched, and a color-coded size configuration for easy identification and reduced set-up time

Desiccant breathers ideal for use with drilling equipment, excavators or hydraulic presses to prevent the entry of contaminants into fluid reservoirs at differential pressures. Available in 5-, 7- & 9-inch length options

Used to filter, clean and transfer fluids into reservoirs. Utilises two high-capacity ModuFlow Plus filters to minimise turbulence and pressure loss, and a heavy-duty frame for additional structural rigidity

Designed to deliver higher working pressures than the Parker 301 Series, along with improved reliability and expanded applications. Equipped with a nitrile inner tube compatible for use with hydraulic and biodegradable fluids