Item | Turbine pump |
Amps | 3.7-3.2/1.6 |
Bearing Type | Ball |
Best Efficiency GPM @ Head | 8.8 @ 75 Ft. |
Best Efficiency Range GPM @ Head | 60 - 100 @ 9.2 - 7.6 Ft. |
Construction | Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. |
Drain Plug | Easily Accessible at Bottom |
Duty | Continuous |
Frame | 56J |
GPM | 8 |
GPM @ 10 PSI | 11.2 |
GPM @ 100 PSI | 7.6 |
GPM @ 20 PSI | 10.9 |
GPM @ 30 PSI | 10.5 |
GPM @ 40 PSI | 10.1 |
GPM @ 50 PSI | 9.7 |
GPM @ 60 PSI | 9.2 |
GPM @ 75 PSI | 8.6 |
GPM @ 80 PSI | 8.4 |
Height | 7.6" |
Housing Material | Cast Iron with nickel plating |
HP | 1 |
Hz | 60 |
Impeller Material | Bronze |
Impeller Type | Open |
Inlet | 1-1/4" |
Inlet Pressure | 132 PSI |
Length | 15.35" |
Max. Case Pressure | 200 PSI |
Max. Fluid Viscosity | 100 SSU |
Max. Liquid Temp. | -20 to 230 Degrees F |
Max. Pressure | 120 psi |
Max. Specific Gravity | 1 |
Motor Enclosure | ODP |
Motor RPM | 3450 |
Motor Type | 3 Phase |
NEMA/IEC Frame | 56J |
Outlet | 1" |
Phase | 3 |
Screw Material | Zinc Plated |
Seal Application | Long life When not Run Dry or Pumping Abrasives |
Seal Material | Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring |
Seal Type | Mechanical Seal |
Service Factor | 1.4 |
Shaft Material | 304 Stainless Steel |
Shaft Size | 5/8" |
Type | Centrifugal |
UPC | 190735327111 |
Voltage | 208-230/460 |
Volute Material | Cast Iron with Nickel Plating |
Wetted Materials | Bronze, Cast Iron,Buna-N, Carbon, Ceramic and 316 Stainless Steel |
Width | 6.7" |