CAMPBELL

Check and Foot ValvesPrevent reverse flow in a piping system. The spring mechanism keeps the valve closed when there is no flow but allows the valve to open when fluid is being pumped. Maintain a minimum liquid level in the pump, preventing dry running and potential damages to the pump or the system. (24 Products)

Well Pump AccessoriesInclude ABS well seals, well points, tank fitting packages, cable guards, torque arrestors, tank tee, coupling drives, cap drives, pump pitchers, piping install packages and more.(30 Products)

Yard HydrantsOutdoor faucets provide a convenient water source for watering plants, washing cars or filling pools. Generally consist of a long stem that extends from the ground above the frost line and a valve & spout at the top for dispensing water. (5 Products)

Barbed Tube FittingsInclude male adaptors, rope adaptors & tees to connect flexible tubing in fluid handling systems. Have a barb or ridge that grips the inside of the tubing to create a secure, leak-free connection.(8 Products)

Relief ValvesProtect fluid handling systems from overpressure. Open at a pre-determined pressure, allowing excess fluid to discharge to the atmosphere / discharge pipe and then close once the pressure drops to a safe level.(2 Products)

Chains(344 Products)

Eye Pulleys and Snaps(135 Products)

Chain and Cable HooksInclude slip hooks for easy attachment & detachment of the load from a chain, rope or cable and self-locking hooks for securing themselves to the load & prevent accidental detachment. (118 Products)

Shackles And Accessories(93 Products)

Connecting and Clevis Links(58 Products)

Master Links(42 Products)

Display Cases(32 Products)

Clamps and Fasteners(25 Products)

Drive Train Tools(25 Products)

Cable Reels(23 Products)

Hitch Pins(23 Products)

S Hooks(21 Products)

Wire Terminal Kits(21 Products)

Block and Tackle(20 Products)

Wire Rope Clips(18 Products)

Eyebolts(16 Products)

Compression Tube Fittings(15 Products)

Sleeve and Thimble Kits(13 Products)

Latches(12 Products)

Swivels(9 Products)

Chain Slings(8 Products)

Towing Accessories(7 Products)

Chain(6 Products)

Hoist Rings And Accessories(5 Products)

Load Binders(5 Products)

Water Tanks(4 Products)

Cable Pullers(2 Products)

Mechanical Connectors(2 Products)

Sling Accessories(2 Products)

Cable Swaging Tools(1 Product)

RopesHigh-strength ropes made from polypropylene, a synthetic polymer known for lightweight, low stretch and high resistance to moisture, abrasion & chemicals. Used in tie-down & lifting applications.(1 Product)

Shrink TubingInclude heat shrink kits, a set of tools & materials to repair and protect electrical connections & components from splicing. Come with heat shrink tubing that shrinks when exposed to heat, creating a tight and durable seal around wires, connectors and other electrical components.(1 Product)

Towing Chains and Cables(1 Product)

CAMPBELL Wall and Yard Hydrant Accessories

Wall and Yard Hydrant AccessoriesInclude hydrant elbows, a hydrant system component, to connect the hydrants to water supply lines and allow the change in the flow direction. Withstand high pressures and extreme temperatures encountered during operations.(1 Product)

Cross-Reference Alternatives

Campbell MPNs cross individual references to the equivalent Bel-Art-Scienceware and Parker valves and fittings. So, if you're looking for a competitor item that is either out of stock or obsolete, chances are Raptor Supplies has the equivalent Campbell products available.

Shipping

These Campbell products range from small to large sizes. They may require careful packaging as some items might get damaged while shipping. Hence, these Campbell items are delivered by courier shipment and air freight for minimum downtime.

The company's catalogue includes a wide range of hose fittings, couplings, clamps, ferrules, tools and accessories. Campbell's foot valves are installed at the end of a pump suction line, allowing the valve to open as the water flows and stops the backflow when the pump is turned off. They feature a one-piece brass body for durability, an NBR rubber seal for resisting chemicals, a sealed hex cap to adjust the pressure, lead-free bronze seating for air-tight sealing and stainless steel spring for opening / closing the operation. The brand's yard hydrants have a rugged design that can supply continuous running water for heavy-duty agricultural, stock watering, fire protection and domestic applications, even in sub-zero weather conditions.

Insta-Lock Coupling

These coupling are used in a variety of applications and are suitable for the chemical, petroleum and military industries. They feature a damage-resistant pull ring to fit snugly & prevent damage and a set of holes in the Lock Zone to allow insertion of a padlock. They further offer an ergonomic han...

dle with palm pads for a comfortable hold and a V-shaped strut to enhance strength and reduce egging (occurred due to repeated dropping).

ChemJoint Coupling

ChemJoint couplings and male stems are suitable for chemical hose assembly systems that eliminate cam and groove problems, such as pressure, temperature, viscosity, side load and more. They feature a serrated pattern near the interlock that tightly grips & seals the plastic-lined chemical hose witho...

ut cutting through the tube.

Pow'r-Tight Clamps

These clamps are ideal for thick-walled & higher durometer hoses and are made of hard stainless steel for exceptional band strength. They provide a smooth seal design for gap-free contact and a heavy-duty buckle for optimal holding power.

GripClamp Tool

This battery-powered tool provides strap tension and eliminate the need for multiple tools. It offers a versatile design and can be used for Campbell J-Series, centre punch, band and buckle applications.

Campbell Crimpnology Technology

Campbell Crimpnology includes fittings, couplings, ferrules and sleeves, crimp specs, testing and training for handling multi-purpose hose applications. It includes interlocking grooves for locking the ferrule into place for ultimate holding power. A proper ferrule positioning also makes assembly easy and speeds up the crimping process. It has a gr...

aduated serration pattern (near the end) to reduce potential failure caused by abrasion. It also provides excellent sealing and retention for high-pressure applications, preventing severe damage to components. It allows a 360-degree swivel rotation for easy installation while eliminating hose kinking.

What is a ferrule?

A ferrule is a tube-like structure with one end turned inwards, allowing an interlock into a groove on a mating fitting or coupling.

How do yard hydrants operate?

When the hydrant is shut off, the canister located below the frost line at the base of the hydrant collects the water to drain down from the hydrant head.
This process protects the supply water from contact with surface water and soil bacteria, preventing head and riser pipe freeze-up.
When the hydrant opens, a venturi effect is created in the system, allowing the head and riser pipe water to recollect during shut-off.

How to install a heat wave joint coupling?

Install one end of the heat wave hose system at the compressor outlet to dissipate heat.
Next, attach standard crimped air hoses from the system to the tools for pumping application.
It comes with a Viton seal to ground joint couplings and standard ferrules for a tight connection.

Categories

Brands

CAMPBELL

Things To Consider

Cross-Reference Alternatives

Shipping

About Campbell

Major Trade Names