Bolt Caps

Filter
APPROVED VENDOR -

Bolt Cap, Socket Spoke

APPROVED VENDOR 8940329A
StyleModelDiameterPrice (inc. GST)
A89403291/4" SGD 1.86
A89403313/8" SGD 1.86
A8940943M10 SGD 1.86
APPROVED VENDOR -

Bolt Cap, Button Spoke

APPROVED VENDOR 8940335A
StyleModelDiameterPrice (inc. GST)
A89403351/4" SGD 1.86
A89403373/8" SGD 1.86
A89403365/16" SGD 1.86
A8940944M6 SGD 1.86
A8940945M8 SGD 1.86
A8940946M10 SGD 1.86
APPROVED VENDOR -

Bolt Cap, Hex Spoke

APPROVED VENDOR 8940324A
StyleModelDiameterPrice (inc. GST)
A89403245/16"-
RFQ
A8940947M6 SGD 1.86
A8940948M8 SGD 56.76
A8940949M10 SGD 1.86
ZURN -

Cap

Cap
ModelItemPrice (inc. GST)
P6000-LLSCF2NHK SGD 61.39
ZURN -

Bolt Caps

Bolt Caps
ModelItemPrice (inc. GST)
Z5972-CAPCF2PDY SGD 12.25
WOODHEAD -

Bolt Cap, 1/2-13 x 6 Size

Bolt Cap, 1/2-13 x 6 Size
ModelItemPrice (inc. GST)
1302260308CH2JVH-
RFQ
WOODHEAD -

Hex Head Bolt Cap, 1/2-1 x 6 Size

Hex Head Bolt Cap, 1/2-1 x 6 Size
ModelItemPrice (inc. GST)
1301810670CH2JVK-
RFQ

Bolt Caps

Bolt caps are used in oil & gas, power generation, marine, wastewater, bridge building and electric & sandblasting industries for protecting against external elements and improving aesthetics.

Features

  • These screw caps feature steel construction for increased hardness and durability, making them less prone to wear and deformation.
  • They are self-contained and do not require any sealant or adhesive for installation.
  • They are chrome-plated to protect against moisture, chemicals and other environmental factors that cause rust and degradation and also prevent scratches, abrasion and surface damage.
  • They add safety to users by covering sharp edges or protruding threads on bolts, thereby reducing accidental injuries.

Frequently Asked Questions

How to install bolt caps on fasteners?

  • Choose the correct bolt cap: Determine the correct size and style of bolt cap that matches the diameter and type of bolt being used.
  • Prepare the bolt: Ensure that the bolt is clean and free from any dirt or debris. If needed, clean the bolt with a soft cloth or brush to get a smooth surface.
  • Align the bolt cap: Place the bolt cap over the bolt head, aligning it properly to fit snugly. The cap should fully cover the bolt head without any gaps.
  • Apply pressure: The user must apply some pressure to secure the bolt cap in place. These bolt caps feature a snap-on design and can be pressed firmly onto the bolt head until they click into place. They do not require threading or screwing the cap onto the bolt.
  • Check for stability: Once the bolt cap is installed, check to ensure that it is securely fitted and stable.

How to remove a stuck bolt cap?

  • Apply a penetrating lubricant, such as WD-40 and let it penetrate for a few minutes to help loosen rust or corrosion that may be causing the cap to stick.
  • Use gripping tools, like pliers / wrenches to gain leverage and twist or pull the cap off.
  • You can also lightly tap the sides of the bolt cap with a rubber mallet. This gentle impact may loosen the cap and break the bolt head. Avoid using excessive force to prevent damage.
  • The metal screw caps can be also heated using a heat gun to loosen the cap.

Can I use bolt caps on threaded rods?

Bolt caps are primarily designed to fit over bolt heads than threaded rods. They snugly fit onto the bolt heads to ensure compatibility and stability. For threaded rods, other protective covers or threaded rod caps must be used for complete protection.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More