Truss Nails

Filter
APPROVED VENDOR -

Truss Nail Flat 1 1/4 Inch Length, 196PK

Truss Nail Flat 1 1/4 Inch Length, 196PK
ModelItemPrice (inc. GST)
148110114AB6LWK SGD 25.64
APPROVED VENDOR -

Truss Nail Flat 1 1/4 Inch Length, 980PK

Truss Nail Flat 1 1/4 Inch Length, 980PK
ModelItemPrice (inc. GST)
148506114AB6LWL SGD 80.43
APPROVED VENDOR -

Truss Nail Flat 1 1/2 Inch Length, 123PK

Truss Nail Flat 1 1/2 Inch Length, 123PK
ModelItemPrice (inc. GST)
4NEZ8AD8XDK SGD 25.64
APPROVED VENDOR -

Truss Nail Flat 1 1/2 Inch Length, 615PK

Truss Nail Flat 1 1/2 Inch Length, 615PK
ModelItemPrice (inc. GST)
4NEZ9AD8XDL SGD 80.43

Truss Nails

Truss nails are used in conjunction with metal connector plates to connect pre-fabricated light-frame wood trusses and provide a strong, secure connection between the wooden components.

Features

  • These nails feature a large, flat head to provide a wide bearing surface that prevents the nail from pulling through the wood.
  • They have a diamond-shaped point that helps to reduce splitting as the nail is driven into the wood frame.
  • Truss nails feature steel construction with hot-dipped galvanised finish to reduce oxidation and protect from rust and corrosion.
  • They are available in smooth / barbed type shank options and have a maximum gauge (diameter) size of 10-1/2 inches.

Frequently Asked Questions

How do I install truss nails?

Truss nails can be installed using a pneumatic nail gun or hammer. They must be driven straight to reach the correct depth and also prevent damage to the wood.

How many truss nails should I use in my application?

The number of truss nails will depend on the specific design of the truss. However, it is recommended to use at least two nails at each connection point, spaced evenly apart for a secure connection.

What is the difference between a smooth and a barbed shank?

  • Smooth Shank: This type of truss nail has a straight, smooth surface along its length. It is commonly used in applications where the nail is subjected to lateral forces, such as framing or sheathing of the truss, as the smooth surface prevents the nail from pulling out.
  • Barbed Shank: A barbed-style truss nail is used in applications where the nail will be subject to tension forces, like the construction of roof trusses. The barbs help to provide extra holding power and prevent the nail from backing out over time.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More