CHERNE Clean-Out Gripper Plugs

Cherne Clean-Out Gripper plugs are used to seal pipes having damaged threads. They have glass-reinforced ABS plastic construction with a natural rubber threaded O-ring and stainless steel nut for corrosion resistance & durability.

Filter
Type: Mechanical
StyleModelNominal SizeRangeMax. Back PressureLengthPrice (inc. GST)
A
270168
2"2.2" To 2.5"17 psi/40 ft.1.9" SGD 31.22
A
270178
3"3.23" To 3.5"17 psi/40 ft.2.2" SGD 27.60
A
270138
3.5"3.78" To 4.25"17 psi/40 ft.2.2" SGD 36.56
A
270188
4"4.22" To 4.6"17 psi/40 ft.2.2" SGD 37.08

Features

  • Cherne Clean-Out Gripper plugs can handle a maximum head pressure of 40 feet & maximum back pressure of 17 PSI (1.2 bar).
  • Their O-rings provide a positive airtight seal in operating temperatures ranging from 0 to 125 degrees F.
  • These plugs are black in colour for blending with cast-iron pipe.
  • They are NPT-sized with nominal sizes ranging from 2 to 4 inches.

Standards and Approvals

  • ISO 9001
  • OSHA

Frequently Asked Questions

How to install & remove these Clean-Out Gripper plugs?

  • For installing these plugs, place them into the cleanout tee or the desired pipe by loosening the nut. Tighten the nut after installation.
  • For removal of these plugs, loosen the nut and then remove from the pipe or cleanout tee.

What are the points to remember before installing these plugs?

  • Select a plug having the proper size according to the pipe.
  • Always measure the maximum back pressure that the plug must withstand. Choose the plug accordingly.
  • Clean the pipe of any debris or foreign substance to reduce damage to the plug. Clean the plug with a mild soap & water without using any cleaning agent.
  • Check the plug for any crack, corrosion, cut, leaks or loose fittings.

How to store these Cherne Clean-Out Gripper plugs?

These plugs must be stored in a dry place below 110 degrees F and away from sunlight & ozone or ultra-violet light sources.

We are here to help!

Looking for a part not listed here?