A Amps: 8.3-7.6/3.8 , Bearing Type: Sealed Ball Bearing (Motor Bearing) , Drain Plug: 180 From Inlet Port , Duty: Continuous , Frame: 56C , Height: 8.375" , Housing Material: Cast iron , HP: 3 , Impeller Material: Bronze , Impeller Type: Regenerative Turbine , Inlet Pressure: 200 PSI , Max. Case Pressure: 300 PSI , Max. Dia. Solids: 25 Microns , Max. Fluid Viscosity: 250 SSU , Max. Pressure: 300 psi , Max. Specific Gravity: 1.00 SP , Motor Enclosure: TEFC , NEMA/IEC Frame: 56C , Outlet: 1" , Phase: 3 , Port Rotation: 90 Increments , Screw Material: Steel , Seal Application: Low Flow, High Head , Seal Material: Carbon, Ceramic, Buna , Seal Type: Type 21 , Voltage: 208-230/460 , Volute Material: Cast-Iron, Bronze Fitted , Width: 8.38"
Turbine Pumps, 3 HP
Dayton 3 hp turbine pumps are suitable for boiler feeds, water treatment plants, reverse osmosis filtration, spray equipment and liquid transfer applications. These pumps are equipped with sealed ball bearings for low rotational friction and feature TEFC / ODP enclosures to prevent overheating & ingress of dust into the motor. They provide flow rates up to 31.2 gpm at 20 psi and are capable of withstanding liquid temperatures up to 230 degrees F. Choose from a wide range of these turbine pumps, available in 1 & 3 phase configurations.