A Bearing Type: Sealed Ball Bearing (Motor Bearing) , Drain Plug: 180 From Inlet Port , Duty: Continuous , Frame: 56C , Height: 7.5" , Housing Material: Cast iron , HP: 5 , Impeller Material: Bronze , Impeller Type: Regenerative Turbine , Inlet: 1-1/4" , Inlet Pressure: 200 PSI , Length: 17.375" , Max. Case Pressure: 300 PSI , Max. Dia. Solids: 25 Microns , Max. Fluid Viscosity: 250 SSU , Max. Pressure: 300 psi , Max. Specific Gravity: 1.00 SP , Motor Enclosure: TEFC , NEMA/IEC Frame: 56C , Outlet: 1" , Phase: 3 , Port Rotation: 90 Increments , Screw Material: Steel , Seal Application: Low Flow, High Head , Seal Material: Carbon, Ceramic, Buna , Seal Type: Type 21 , Voltage: 208-230/460 , Volute Material: Cast-Iron, Bronze Fitted , Width: 8.12"
Turbine Pumps, 5 HP
Dayton 5 hp turbine pumps are used in reverse osmosis filtration, water treatment plants, spray equipment, boiler feeds and liquid transfer applications. These turbine pumps are integrated with sealed ball bearings for low rotational friction and preventing lubricant leakage. They deliver flow rates up to 40.6 gpm at 20 psi and are capable of withstanding liquid temperatures ranging from -20 to 230 degrees F.