EATON Danfoss MRV3-16 Series Directional Control Valves

Eaton Danfoss MRV3-16 Series directional control valves are ideal for controlling the flow of general-purpose hydraulic fluids complying with standards like MIL?H?5606, SAE 10 & SAE 20. They are suitable for use in harvesters, refuse haulers and other applications.

Filter
EATON 566581A
EATON 566068B
EATON 565627C
StyleModelPrice (inc. GST)
A
566581		- SGD 710.02
RFQ
B
566068		- SGD 551.21
RFQ
C
565627		- SGD 521.27
RFQ

Working Mechanism

  • These directional control valves block valve port 2 in one position and direct the fluid flow between valve ports 1 & 3.
  • Users need to turn the operator 90 degrees to direct the flow between valve ports 1 & 2 and block port 3.
  • During cross-over transitions, all of these ports get blocked.

Features

  • Eaton Danfoss MRV3-16 Series directional control valves have steel construction for structural rigidity & durability.
  • They feature screw-in cartridge type for easy mounting / installation.
  • These direct-acting MRV3-10 Series directional control valves have Buna-N seals to prevent leakage.
  • They have 3 ports with a maximum flow rate of 64 l/min (17 gpm).
  • These 4-way 3-position valves can operate at temperatures ranging from -40 to 120 degrees C.

Compatible Accessories

  • Eaton 889636 Seal Kit: This seal repair kit has a Viton seal that provides enhanced chemical resistance in these flow control valves.
  • Eaton 889632 Seal Kit: This seal repair kit has a Buna-N seal used to replace worn-out or damaged Buna-N seals in these flow control valves.

Frequently Asked Questions

What is the pressure rating of these Eaton Danfoss MRV3-16 Series directional control valves?

These Vickers Eaton MRV3-16 Series directional control valves have a pressure rating of 210 bar (3000 psi).

What is the allowable stem torque in the valve cavity of these Eaton Danfoss MRV3-16 Series valves?

The allowable stem torque applicable in the valve cavity of these Eaton Danfoss MRV3-16 Series directional control valves is 108 to 122 Nm to prevent damage to the valve.

How to prevent contaminants in these Eaton Danfoss MRV3-16 Series directional control valves?

Users are recommended to install filtration equipment with cleanliness code 18/16/13 before the valves to prevent contaminants from entering them.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More