JUSTRITE Aerosolv Series Aerosol Can Disposals

Justrite Aerosolv Series aerosol can disposal systems are ideal for recycling spray cans. They reduce the handling & processing cost of hazardous waste in various chemical processing and ...Read More

Filter
JUSTRITE 28231A
JUSTRITE 28202B
JUSTRITE 28230C
JUSTRITE 28100D
Body Material: Aluminum , Depth: 18" , Height: 9" , Puncture Pin Material: Stainless Steel , Width: 18"
StyleModelCoatingPin MaterialCone MaterialSizePrice (inc. GST)
A
28231		---- SGD 4,701.93
B
28202		---- SGD 1,835.16
C
28230		Material Resistant Coating-Aeroprene- SGD 3,583.50
D
28100		Material Resistant Coating--- SGD 3,268.09

Working Mechanism

  • Place the aerosol can (nozzle down) into the Aerosolv housing sleeve.
  • Lower the sliding top plate over the inverted can's bottom and firmly engage against the plastic sleeve.
  • Tighten the lock knob on the housing's side.
  • Tighten the sealing knob to press the aerosol can further against the interior gasket.
  • Push the handle down entirely until it is totally depressed, then hold it in place as the can releases the initial pressure.
  • Slowly raise and quickly depress the handle to adjust the rate of pressure and content evacuation from the aerosol can.
  • Allow the content of the can to drain into the collection drum for about 20 seconds to avoid back pressure.

Features

  • These Justrite aerosol can disposal systems have two-piece coalescing / carbon filters that absorb VOCs.
  • They have a lockout & shut-off mechanism that prevents the escape of hazardous vapours.
  • Selected models are equipped with a counter that assists users in remembering the number of cycles.

Compatible Accessories

  • Justrite Coalescing Carbon Filters: They are used to capture and neutralise harmful emissions, ensuring a safer and more environmentally responsible aerosol can disposal process.

Standards and Approvals

  • EPA

Frequently Asked Questions

How to install these aerosol can disposal systems?

  • Get a liquid collection drum (30 to 55-gallon capacity) with two standard bungholes.
  • Choose an acceptable receptacle and inspect it for signs of wear and tear.
  • Check that the bung plugs for each hole are securely in place.
  • Insert the Aerosolv unit via the 2-inch bunghole.
  • Turn it clockwise until the ground support plate is securely engaged with the drum rim.
  • Before using, insert the combination filter into the liquid collection drum's 3/4-inch bung.
  • Connect the anti-static wire's g-clamp to any nearby confirmed ground source.

How to protect these units from environmental contamination?

  • Use a drum cover to avoid dust ingress.
  • Install them above a non-earthen floor, free of cracks.

How to dispose of processed aerosol cans?

Aerosol cans can be recycled with other steel scraps after processing.

How to ensure safety while using these Aerosolv systems?

  • Ground these units properly using an anti-static wire.
  • Always use drums having a capacity of 30 gallons or higher.
  • Always engage the sliding top plate and sealing knob against the can being punctured.
  • Once the venting operation is complete, insert a padlock to avoid unauthorised use.

How to maintain these Justrite aerosol can disposal systems?

  • These systems must be inspected after puncturing about 1000 cans.
  • Clean the drum thoroughly.
  • Apply three wraps of Teflon tape to the threads that attach to the collection drum.

What are the factors to consider while choosing these Justrite aerosol can disposal systems?

Major factors include aerosol can types, regulatory compliance, disposal volume, emissions control and ease of use.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More