JUSTRITE 24180 Corrosive/Acid Safety Cabinet, 35 x 36 x 25 Inch Size, Manual Close, Polyethylene, Blue

Justrite 24180 corrosive cabinet is used to safely store corrosive chemicals like hydrochloric, sulphuric or nitric acids and sodium, potassium or calcium hydroxides in laboratories, testing centres and chemical plants.

Features:

• Justrite 24180 corrosive cabinet is made of HDPE (high-density polyethylene) without any metal parts for chemical resistance against stored acids or bases.
• It allows 180-degree doors to open for easy access to the stored contents. The doors engage firmly with the cabinet's body when closed and can be locked using a padlock (not included) for enhanced security.
• This cabinet is integrated with a leakproof sump (8.5-gal / 32-L) capacity) covered by a removable & sturdy sump cover that acts as a bottom shelf.
• It features recessed channels in the bottom shelf / base to direct any spillage from the stored contents to the cabinet's backside and down into the sump.
• It has three application-specific labels (ACID, BASE & CORROSIVE) for easy identification, storage & segregation of contents.

Standards and Approvals:

• OSHA

Frequently Asked Questions:

Q. What is this Justrite 24180 corrosive cabinet made of?

A. This Justrite 24180 corrosive cabinet is made of HDPE (high-density polyethylene) without any metal parts for chemical resistance against spills or vapours containing strong acids or bases.

Q. What are the safety tips to operate this corrosive cabinet?

A.

• All the chemical containers should be sealed properly before storing them.
• Any spillage on the cabinet rack, floor or shelf should be cleaned immediately.
• The leakproof sump should be cleaned using rags. The rags should not be kept inside the cabinet.

Q. Can the shelf of this cabinet be adjusted?

A. Yes, this cabinet's shelf can be adjusted in 3-inch (76-mm) increments.

Q. How many bottles can this corrosive cabinet store?

A. It can hold up to 36 bottles of 2.5-litre volume each (total 90 L) or loads up to 125 lb.

Q. Can we install an additional vent in this Justrite 24180 corrosive cabinet?

A. Yes, This cabinet's rear has four pre-formed vent locations to install an aftermarket vent kit.

Q. What maintenance is required for Justrite 24180 corrosive cabinet?

A.

• Regularly inspect the cabinet for any signs of damage, such as corrosion, dents, or worn-out components.
• Clean the cabinet using mild detergent and water, ensuring any spilt substances are properly removed.
• Replace any damaged or worn-out parts, such as seals or hinges, to maintain the integrity of the cabinet.