Toggle Bolts

Filter

Toggle bolts are designed for hanging objects on drywalls for construction, mining and oil & gas applications. Raptor Supplies offers these toggle bolts from brands like Cooper B-Line and Red Head. They can also be used for installing handrails on staircases.

APPROVED VENDOR -

Steel Toggle Bolt

StyleModelBolt SizeDrill SizeHead Dia.Head HeightScrew LengthSizeThread LengthThread SizePrice (inc. GST)
A11K3091/4"11/16"7/16"3/16"3"1/4"2.875"1/4-20 SGD 57.46
B11K3101/4"11/16"7/16"3/16"4"1/4"3.875"1/4-20 SGD 63.00
C11K3111/4"11/16"7/16"3/16"5"1/4"4.875"1/4-20 SGD 65.12
D11K3121/4"11/16"7/16"3/16"6"1/4"5.875"1/4-20 SGD 70.27
E11K3021/8"1/2"1/4"0.1"3"1/8"2.875"6-32 SGD 26.85
E11K3011/8"1/2"1/4"0.1"2"1/8"1 31/32"6-32 SGD 28.56
E11K3031/8"1/2"1/4"0.1"4"1/8"3 31/32"6-32 SGD 31.77
E11K3133/8"1"5/8"1/4"3"3/8"2.875"3/8-16 SGD 63.05
E11K3143/8"1"5/8"1/4"4"3/8"3.875"3/8-16 SGD 69.07
E11K3163/8"1"5/8"1/4"6"3/8"5.875"3/8-16 SGD 96.70
E11K3153/8"1"5/8"1/4"5"3/8"4.875"3/8-16 SGD 73.27
E11K3073/16"9/16"3/8"1/8"5"3/16"4.875"10-24 SGD 45.78
E11K3053/16"9/16"3/8"1/8"3"3/16"2.875"10-24 SGD 37.42
E11K3063/16"9/16"3/8"1/8"4"3/16"3.875"10-24 SGD 38.08
E11K3083/16"9/16"3/8"1/8"6"3/16"5.875"10-24 SGD 50.01
E11K3043/16"9/16"3/8"1/8"2"3/16"1 31/32"10-24 SGD 35.17
COOPER B-LINE -

Toggle Bolts

StyleModel
AATB-18-300
RFQ
AATB-18-400
RFQ
AATB-25-300
RFQ
AATB-25-400
RFQ
AATB-37-300
RFQ
AATB-37-400
RFQ
RED HEAD -

Anchor Toggle, 50Pk

ModelItemPrice (inc. GST)
5014901AD7FEC SGD 141.06

Toggle Bolts

Toggle bolts are designed for hanging objects on drywalls for construction, mining and oil & gas applications. Raptor Supplies offers these toggle bolts from brands like Cooper B-Line and Red Head. They can also be used for installing handrails on staircases.

Features

  • These toggle bolts are also known as butterfly anchors due to to their expanding wing nuts.
  • They are two-part assemblies comprising a spring wing toggle and a machine screw.
  • When toggle bolts are are inserted, the wings brace against the surface to distribute the stress uniformly.
  • These toggle bolts are designed for use in block, wallboard, plaster, plywood as well as and other hollow base materials.
  • These toggle bolts are available in 1/2, 1/4, 1/8, 3/16, 3/8 and 5/16 inch sizes.

Frequently Asked Questions

How to install toggle bolts?

  • Insert the bolt through the fixture and thread the toggle onto it.
  • Toggle wings are folded flush against the bolt and pushed through a hole until they pop open on the opposite side..
  • Pull back on the bolt and tighten.
  • In denser materials such as high-strength concrete, a drill bit can be used (1/16 inch larger than the listed size).

What should the length of a toggle bolt be?

  • Bolt lengths should be long enough, but not be so long that they affect the rear of the hollow wall system.
  • Normally, drywall systems have 3-1/2 inches of hollow space, so the longest toggle bolt that can be used there would be 3 inches in length.

Can you reuse toggle bolts?

  • Generally, toggle bolts can not be reused, as driving the screw into the toggle bolts stretches the plastic.
  • If you buy reusable anchors or take precautionary steps during installation, the anchors could be reused.

We are here to help!

Looking for a part not listed here?