Dynabrade 48522 right angle air disc sander is ideal for metal beveling in weld preparation, deburring, surface conditioning and fast weld & paint removal.
Features:
- Dynabrade 48522 right angle air disc sander features a governor-controlled air motor for maintaining constant speed under load during operation.
- It is equipped with an extended muffler to minimise the sound generated while running.
Compatible Accessories:
- Dynabrade 96541 Motor Tune-Up Kit: This kit is suitable for tuning, repairing & maintaining the sander to run smoothly and efficiently.
- Dynabrade 96460 Crowfoot Wrench: It is used in places to accommodate an open-end wrench.
- Dynabrade 50971 Lock Ring Tool: This lock ring provides a rigid clamping action and only requires a small axial gap along the rod.
- Dynabrade 96399 Hex Key Wrench: It is suitable for driving screws and bolts with a hexagonal socket.
- Dynabrade 95842 & 95843 Air Lubes: They reduce the resistance between the surfaces and ensure smooth functioning.
- Dynabrade 95848 Gear Oil: It aids in preventing wear and heat damage to important internal gear components in the sander.
- Dynabrade 94994 & 94995 Over Hose Assembly: These assemblies are used to transmit forces using oil pressure and contain flexible hydraulic hoses to which fittings are fitted at either end to guarantee safe, interlocking connections.
- Dynabrade 95842 and 95542 Lubricants: They are applied to minimise friction between parts of this sander.
Frequently Asked Questions:
Q. How can we install Dynabrade 48522 right angle air disc sander?
A.
- Use a closed-loop air system and filter-regulator lubricator to ensure long service life.
- Each tool needs a hose that connects to an air supply manifold. Installing quick disconnects at the manifold will prevent contamination of the tool.
- Dynabrade rotary vane air tools are to be used with a filter regulator lubricator to reduce the risk of overuse caused by dirty air, wet air or inadequate lubrication.
Q. How much lubricant is required in this disc sander?
A. Dynabrade recommends one drop of air lube per minute for each 20 SCFM.
Q. How to maintain Dynabrade 48522 right angle air disc sander for daily use?
A.
- Check your tool and accessories for broken or damaged parts. To ensure operation and safety, replace parts as needed.
- Always lubricate your motor.
- Mantain air line pressure with a gauge (maximum 90 psig or 6.2 bar operating pressure).
- Check that the tool runs correctly. If it exhibits odd vibration, it needs to be repaired and fixed before using again.